bgm - Item number: BGM4500 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Brakes> Brake-clutch levers Other customers who are interested in brake lever set -BGM PRO CNC Sport, short (130mm) - Vespa GT, GTL, GTS 125-300 - black are interested, also looked for: brake lever | Brake handle | Lever [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

This allows you to shorten your entire gear ratio without having to open the entire engine. The quick way with a fourth gear that is too long and the associated gear connection problems. The bgm gear wheels are hardened with 58 HRC and thus correspond to the Piaggio OEM quality. bgm - Item number: BGM01801 Availability: in stock (Please check availability here in [...]

bgm - Item number: BGM1770HS10 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacers Other customers who are looking for Spacer cylinder head -BGM PRO 177/187 ccm - Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 1.0mm interested, searched [...]

Should be replaced with every exhaust change to be on the safe side. Otherwise, false air can be drawn through the outlet and there is a risk of cylinder damage. bgm - Item number: 8006001 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Gaskets Other customers who are interested in Gasket exhaust -BGM [...]

bgm - Item number: 3333084 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 177 cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - [...]

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

bgm - Item number: BGM2585 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Carburettor> Spacer Other customers who are looking for intake manifold spacers -BGM PRO Malossi / Polini-Vespa PX80, PX125, PX150, PX200, Sprint, Rally180 (VSD1T), Rally200 (VSE1T) - 6mm are interested, also looked for: Intake manifold spacer | Spacer [...]

bgm - Item number: BGM8010S Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Clutch> Clutch baskets Other customers who are looking for clutch spider -BGM PRO Superstrong 10 springs- Lambretta LI, LI S, SX. TV (series 2-3), DL / GP interested, also looked for: coupling spider | Spider | [...]

Shock absorbers from the BGM PRO SC series are THE coilover kit for Vespa with TÜV! The chassis developed by BGM in Germany is available with an ABE for almost all Vespa scooters. The shock absorbers are fully adjustable and offer an incomparable driving experience that was previously unknown on a scooter. with ABE individually [...]

Clever tool from BGM for the damage-free installation of studs. Screw the BGM Pro tool onto the stud bolt and counter with the integrated hexagon socket screw. It is braced with the thread of the stud bolt. Now turn the outer wrench flat. The stud bolt is fixed and is loosened or screwed in. Pay attention to a sufficiently firm counter-locking so that [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]