The bgm PRO Racing shaft is designed as a stable shaft for ESC class 1 drivers. With a 51mm stroke, 97mm connecting rod length and a sturdy Ø24mm alternator stub, as a full-cheek shaft, it offers ideal conditions to fully exploit the limits of this racing class. The large crank webs offer significantly more overlap over the crank pin, resulting in a higher pressing dimension and thus [...]

BGM PRO speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already greased speedometer cable is easy.

bgm - Item number: 1079157B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Fork> Speedometer drives Other customers who are interested in speedometer worm on shaft -BGM ORIGINAL- Vespa 10 Teeth, Ø = 21,8mm, metal (suitable for speedometer worm 9 teeth) - (used in Vespa V50, 50N, 50L, 50R [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

bgm - Item number: BGM8910L Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,09 kg Category: Motor> Clutch> Clutch arms Other customers who wanted clutch arm -BGM PRO- Vespa PK50 XL2 ( V5X3T), PK50 HP (V5N2T), 50 (V5N1T), also searched for: coupling arm | Clutch lever | Operating arm | Clutch lever arm [...]

High quality ignition base from BGM. Specially developed for converting contact-controlled motors to maintenance-free electronic ignition. The base plate has been modified to fit the engine housing built before 1977 and has a longer cable branch so that the ignition base plate can also be perfectly mounted on older vehicles. After the conversion, the former 6Volt on-board network has [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

bgm - Item number: BGM6475TX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Workshop supplies> Trains Other customers who are interested in end cap for outer cable -BGM ORIGINAL- Ø inside = 5mm - 10pcs. interested, also searched for: end cap | Outer cable | End cap | Pull sleeve | Pull cap | Sleeve | Grommet [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

The bgm PRO Sport silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. Compared to the bgm PRO Touring silent rubbers, this version is much tighter and therefore perfect for precise handling and quick changes of direction at high speed. With the reinforced bgm motorized rubber rubbers supplied in pairs, the chassis gains directional stability, steering precision and [...]

The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]

bgm - Item number: BGM6610BL Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,66 kg Category: Motor> Rubber parts> Hoses Other customers who are interested in radiator hose set -BGM PRO silicone 180 ° C- Vespa GT 125-200, Vespa GTL 125-200, Vespa GTS 125-300, Vespa GTV 125-250 - blue are interested, also looked for: [...]