bgm - Item number: BGM3425 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Fork> Nuts Other customers who are interested in castle nut swing arm / front wheel bearing- BGM Original -VESPA - V50, V90, SS50, SS90, PV125, ET3 are also interested in: Circlip | Front wheel bearings | Circlip | Clip | [...]

bgm - Item number: BGM2200BS05 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder base -BGM PRO RaceTour- Lambretta LI , LIS, SX 125-150, TV 175 (series 2-3), DL / GP 125-150 - 0.5mm are also interested in: Spacer [...]

bgm - Item number: BGM7992 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frames> Wheels> Nuts Other customers who are looking for cap nut set for Vespa rims (type PX ) -BGM ORIGINAL, stainless steel- M8 - SW = 13mm, also looked for: hat nuts | Sentence | Mother | Screw nut [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

bgm - Item number: BGM809GST Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Engine> Clutch> Tools Other customers who are interested in clutch wrenches for lock nut / locknut -BGM ORIGINAL- Vespa GS150 / GS3, GS160, SS180, Ø = 33,5mm, Attention: You are interested in left-hand thread, you also looked for: Slotted nut | Tool | Coupling tool [...]

The BGM 200ccm cylinder is an improved version of the already reliable and powerful original cylinder. Suitable for the 200cc engines of the Rally200, PX200 and Cosa200 models, the bgm cylinder offers additional safety and performance thanks to an exact honing dimension of 9/100 running clearance as well as a slightly increased compression due to a 0,7mm reduction [...]

Only suitable for versions V1.0 and V2.0! bgm - Item number: BGM2105BR Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Exhaust> Brackets Other customers who are interested in front exhaust brackets -BGM PRO Clubman V1.0 , V2.0- Lambretta series 1-3 - silver interested, also looked [...]

Lambretta bgm PRO MRB RaceTour membrane piston kit with 70 mm diameter. Complete piston kit consisting of: piston, two steel piston rings each 1mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is the perfect choice if you have converted your RT 225 cylinder to diaphragm control and want a durable and [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

BGM PRO Superstrong Carbon Clutch Linings Type CR The BGM carbon clutch linings have a significantly harder and more wear-resistant lining material than the standard BGM linings. This makes them even more temperature-stable, but they also need a certain basic temperature to develop sufficient grip. They also require higher spring rates than the standard lining material in order not to slip with the same engine torque. [...]

bgm - Item number: 7675168 Availability: In stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electrical Other customers who are interested in insulating hose for flat plug 4,8mm Ø = 0,5 , 1,0-46343mm²- DIN 10 - XNUMXpcs. interested, also searched for: insulating tube | Bougie ear | Grommet | Cable grommet | Conduit | Empty pipe [...]

bgm - Item number: 7672702 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,19 kg Category: Frames> Cables> Cables Other customers who want universal train inside -Ø = 1,6mm x 1750mm, nipple Ø = 5,5mm x 7mm- used as a shift cable - turned interested, also looked for: Zug | Universal | [...]