If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

bgm - Item number: BGM7890D84 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Fork> Disc brake sets Other customers who are interested in spacer sleeves for disc brakes -BGM PRO Anti -Dive (8,4mm) - Lambretta LI, LIS, SX, TV, DL, GP are interested, also looked for:

bgm - Item number: BGM2292 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Handlebars> Throttle cable pulleys Other customers who are interested in cable pulley -BGM Pro made by JPP , QUICK ACTION, aluminum CNC- Lambretta LI (series 3 from 1966), LIS (from 1966), SX, [...]

bgm - Item number: BGM4505 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,30 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO CNC Sport, long (165mm) - Vespa GT, GTL, GTS 125-300 - chrome are interested, also looked for: brake levers | Brake handle | Lever [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

BGM PRO silicone engine gasket set for Vespa Largeframe 2-channel engines 1959-1969 Sprint150 (VLB1T), GT125 (VNL2T), GL150 (VLA1T), Super125 / 150 (VNC1T / VBC1T), VNB, VBA, VBB The BGM PRO silicone engine gasket set is specific suitable for engines of the so-called large frame models between year of construction 1959-1969. These vehicles can be recognized by the removable side panel (with rubber seal) on the engine side and a carburetor in the [...]

Complete set to match your indicators and the taillight perfectly to the look of the scooter. With a few, easy-to-use hand movements, you get a great look! bgm - Item number: K070200 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Frame> Electronics> Indicator glasses [...]

Intake manifold -BGM PRO Evolution- Piaggio - CS = 23mm. Open intake manifold for all Piaggio scooters with the 50 cc engine housing. The ideal connection between the Dellorto, Gurtner and Arreche carburetors with 23 mm connection width. The carburetor stands straight back and offers a crisp, short intake path for a clean turning behavior. Better acceleration, free turning and higher [...]

BGM Pro Spezial crankshaft bearings with narrow shoulder width for Vespa Wideframe engines These bearings should be used if the high-quality Corteco shaft sealing rings are to be installed at the same time. The Corteco shaft seals have a greater material thickness than the previously common shaft seal carriers (0.8mm instead of 0.5mm sheet metal thickness). The narrower bearing shoulders of the BGM PRO bearings compensate for the thicker sheet metal [...]

High-precision reproduction of the original auxiliary shaft axis of the Vespa GS160 and SS180 models. Made of extremely resilient and tempered 42CroMo4V steel. Qualitatively not comparable with cheaper replicas. The scope of delivery also includes the corresponding red brass fitting bushing. This means that the primary drive can be repaired with 100% factory specifications. bgm - Item number: 7676645 Availability: in stock (Please check the [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. The pear nipples used with the brake / clutch cable require a corresponding adapter to fit into the round cutout of the handlebar. Unfortunately there are no [...]

Lambretta cylinder base gasket with a thickness of 1,0 mm for the small engine blocks with 125-193 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, turned cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.