BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

bgm - Item number: BGM2285 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,27 kg Category: Frame> Handlebars> Shift gas pipes Other customers who are interested in gas pipe -BGM PRO- Vespa PX , T5 125cc - for use with quick throttle (Tommaselli, Scooter & Service, Domino), also searched for: gas pipe | Inner tube | [...]

bgm - Item number: BGM2225BS05 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder base -BGM PRO RaceTour- Lambretta SX 200, TV 200, DL / GP 200 - 0.5mm are also looking for: Spacer | Cylinder base | Distance seal [...]

bgm - Item number: BGM7751B Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 1,46 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are interested in front shock absorbers -BGM PRO SC / F1 SPORT , 275mm- Vespa Primavera 50 (2013-2016), Vespa Primavera 125 (2013-2016), Vespa Primavera 150 (2013-2016), Vespa Sprint 50 (2013-2016), [...]

Clever maneuvering aid for all Vespa GT, GTS, GTL and GTV scooters. Perfect for moving the vehicle quickly and easily in a tight garage. To do this, place the vehicle on the side stand. Place the two-part maneuvering aid under the scooter, put it together and fix it quickly and easily with the wing screw. Now just jack it up with the main stand. Now can [...]

The course of the throttle grip is horizontal and the stroke is 38 mm. This makes it ideal for carburetor sizes up to 35 mm. The processing is on a very high level down to the smallest detail. The scope of delivery includes rubber protection against rainwater and, above all, against coarse dirt such as those found in the terrain. [...]

bgm - Item number: BGM7795S Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,40 kg Category: Frame> Body> Steering damper Other customers who are interested in steering damper -BGM PRO SC FS / 10- 380mm- 125mm damper travel - silver are of interest, also looked for: Steering damper | Steering damper | Shock absorber | Shattering | Flutter [...]

BGM Pro SC SPORT shock absorbers -Sporty- Comfortable -Adjustable-With TÜV- Sportiness paired with outstanding optics. With factory pre-configured damping, spring preload (pre-load) continuously adjustable. HARMONIOUS The BGM Pro SC SPORT coilover kit convinces with its harmonious basic set-up. Intended for sporty driving on the road, the predefined specific damper setting and spring rate is an optimal balance of sportiness and suitability for everyday use. [...]

Adjustment screw set, suitable for the derivatives of the Keihin PWK carburetors with small body (24mm - 26mm - 28mm - 30mm) from Stage6, Motoforce, Koso, OKO, etc. Contains both the air screw and the idle screw. Incl. the springs and O-rings / seals behind it. Attention: The idle screw of this set has an M4 thread, therefore not suitable for original [...]

Conversion set to cable choke so that the choke can be conveniently operated remotely from the handlebar or chassis. Contains the components for the carburetor. If not already available, complete this set with a corresponding choke lever and cable (see accessories). Suitable for flat slide carburetors from Mikuni (TMX30, TMX32), Keihin PWK28 and Polini carburettors, as well as many OKO, Koso and Stage 6 [...]

The bgm PRO assembly stand is ideal for maneuvering the scooter when its engine is removed. The assembly stand acts as a maneuvering aid and makes the scooter chassis extremely manoeuvrable thanks to the smooth-running industrial castors (shopping cart principle). To do this, the assembly stand is simply attached to the mounting points of the motor (the corresponding bolt for attaching is of course included). The scooter thus receives [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]