BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

bgm CDI with integrated ignition coil for all electronic Vespa and Lambretta ignitions based on the so-called Ducati ignition. Here in the complete kit with a suitable spark plug cable and spark plug connector with the corresponding rubber seals. Suitable for: Vespa PX Vespa PE Vespa T5 Vespa PK Lambretta DL / GP electronic Lambretta with conversion to electronic ignition All Vespas [...]

Shock absorber spring BGM ORIGINAL 165mm length in black for Vespa Rally200 etc. The characteristics of the BGM ORIGINAL spring correspond to the original factory installed spring. Some models (e.g. Rally200) were supplied with a black nib as standard. This spring thus offers the possibility of a vehicle restoration that is perfectly true to the original. PRODUCTION The spring is [...]

BGM Pro Sport bench made by Nisa Italy Based on the very popular Nisa 'Sport 20' bench, we had a BGM version made by NISA. AUTHENTIC LOOK The BGM Pro Sport bench has a beautiful Alfatex cover (embossed waffle pattern) on the sides and back and is also available with gray piping. The seat is also [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Piaggio specific plug with enclosed contact clamps. A defective cable harness can be repaired or cable branches or entire cable harnesses can be created yourself. Simply connect the cables to the plug contact (crimp or solder with the appropriate pliers) and then push them into the plug. The contact locks in automatically and is then permanently connected to the plug. Two contacts: [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

BGM flywheel nuts are made from high quality 42CrMo4. This material is extremely tensile and clearly surpasses the quality of the original nut. A tight fit of the pole wheel is ensured at all times by the high possible tightening torque. Tightening torque pole wheel nuts M10 / M11 (V50, PV, ET3, PK S, Sprint, VBB ...): 45-50 Nm M12 (PX, Rally, GS160, SS180, T5, Cosa, PK XL): 60-65 [... ]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

bgm - Item number: BGM666PXA Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 8,85 kg Category: Engine> Ignition> Ignitions Other customers who are interested in ignition set -BGM PRO 12V Touring - Vespa P80X, P125X, P200E (1977-1983, models with indicator, voltage regulator and battery) - P80X, PX80E (V8X1T), P125X (VNX1T), [...]

BGM PRO universal choke cable. Anodized metal housing with the possibility of direct screwing in a hole or alternatively to be clamped on the side with the supplied aluminum clamp. Plastic operating knob. Screw-on housing that has a screw nipple inside. This means that the inner cable can be perfectly adjusted to the required length. Available with 50cm and 150cm cable lengths. 150cm cable length [...]

Cylinder base gasket -BGM PRO- 1,5mm Polini 177ccm bgm - item number: 3820041 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are Interested in spacer cylinder base -BGM ORIGINAL Polini / Parmakit 177 ccm- Vespa PX80, PX125, PX150 - 1.5mm, searched [...]