bgm - Item number: BGM2292B Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Handlebars> Throttle cable pulleys Other customers who are interested in cable pulley -BGM Pro made by JPP , QUICK ACTION, aluminum CNC- Lambretta LI (series 3 from 1966), LIS (from 1966), SX, [...]

bgm - Item number: BGM0292HS05 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø52.5mm- Vespa PX125, Cosa125, GT125, GTR125, TS125, Super125 - 0.5mm are interested, also looked for: Spacer | Cylinder head | Distance seal [...]

The BGM PRO SC shock absorber series is one of the finest chassis components that you can treat your scooter to. CNC machined, high-strength aluminum (6061) which is finally equipped with an absolutely corrosion-resistant hard anodized coating, form the basis for the high-end chassis. The very stable piston rods are machined in an extremely complex manner in order to obtain perfect surfaces with ideal sliding properties. Thereby [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: BGM7782FRKS Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,09 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are interested in rear shock absorber fork (spare part) -BGM PRO SC / R12 COMPETITION, 330mm- Vespa PX, Rally - silver interested, also looked for: shock absorbers | Rear | Shock absorber | [...]

bgm - Item number: BGM7783ADJ205 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Shock absorbers> Shock absorbers Other customers who are interested in front shock absorber adapter -BGM PRO for BGM PRO SC / F16 - Vespa PK - 205mm, also looked for: Shock absorber adapter | Front | Damper adapter | [...]

bgm - Item number: BGM8820 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Gearbox> Springs Other customers who are interested in gear spring -BGM PRO XL- Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL are also interested in: Shift spring | Shift spring | [...]

bgm - Item number: BGM1925 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Motor> Gearbox> Variomatic weights Other customers who are interested in weights -bgm original 19 × 15,5mm - 9,20g, also searched for: Weights | Role | Vario roll | Variator roller | Vario rolls | Rolls | Variator | [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Connection cable between tank sender and vehicle wiring harness. No longer available from Piaggio, now available as a high quality reproduction from BGM. Like the original: with cable ties around the rubber bougier tube to the frame, wiring harness-specific connector Suitable for all Vespa PX models from 1984 with plastic fuel tank sensor. Also suitable for Vespa T5 and PK XL with plastic tank sender. bgm - Article number: SC5008 Availability: on [...]

bgm - Item number: BGM2225HS05 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 0,5 - XNUMXmm are interested, also looked for: Spacer | [...]