NOTE: According to StVZO §56, every motor vehicle in Germany, which also includes mopeds, requires at least one mirror attached to the left side of the vehicle. NUMBER The number of mirrors depends on the first registration (EZ): EZ before 01.01.1990 1 mirror left EZ from 01.01.1990 up to 100 km / h 1 mirror left EZ from 01.01.1990 over 100 km / h 2 [... ]

Combined throttle / shift cable reel from BGM. It can be used as a large throttle pulley with quick throttle function. Conventional shift pulley. The larger diameter allows the existing carburetor to be opened more quickly and, above all, completely. Even carburetors with a cross-section of 30mm can be used comfortably in everyday life without having to use a noticeable external quick throttle. By [...]

BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]

Cable harness BGM ORIGINAL suitable for all Vespa PX models up to year of construction 1982 Italian version without battery. With this, the indicators, the horn (so-called buzzing) and all other consumers are supplied with power directly via the AC on-board network. The ignition base plate used in these vehicles is suitable for this with only 3 cables (contact ignition models) or 5 cables (vehicles).

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Carburetor -PHBN 17,5- Minarelli 50ccm - manual choke. The PHB carburettors are a constant in the scooter sector. They are characterized by easy assembly and good tunability. If a DellOrto PHB carburettor is already installed on the vehicle, changing to a larger one of the same type is possible without any problems. The PHB 17,5 mm [...]

bgm - Item number: BGM6398UB Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,17 kg Category: Frames> Cables> Cables Other customers who are interested in universal train -BGM ORIGINAL, Ø = 1.6 mm x 2500mm, sleeve = 2200mm, nipple Ø = 5.5mm x 7.5mm, inner sleeve PE, black- used as a shift cable are interested, also looked for: [...]

For permanent fixation, stickers need a clean, smooth and degreased surface. Our brake cleaner, for example, is very suitable for degreasing. In the case of larger areas to be glued, it is always an advantage to spray the area with a little water before gluing. The water can also be mixed with a few drops of detergent to make it [...]

Lambretta bgm PRO MRB RaceTour piston kit with 70 mm diameter. Complete piston kit consisting of: piston, two steel piston rings each 1mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

bgm - Item number: 7673822 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Engine> Ignition> Cables Other customers who are interested in ignition cables -UNIVERSAL Ø = 7mm- 100cm - Schwarz are also interested in: Ignition cables | Ignition cable | Spark plug wire | Cable | Ignition | Cable | Cable [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]