The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

bgm - Item number: BGM4950 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,72 kg Category: Frame> Body> Main stand Other customers who are interested in main stand -BGM PRO Soft Stop System- Vespa Largeframe Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), GT / GTR125 (VNL2T), TS125 (VNL3T), GL150 (VLA1T), VNB2T to VNB6T, [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

Remote air filter system based on the bgm PRO suction hose and a Marchald foam air filter. bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

BGM PRO shaft sealing rings made of high-quality and ethanol-resistant (E10) FKM / Viton® * CORRECT HEIGHT (20x62x7MM INSTEAD of 20x62x6.5MM) The coupling-side BGM PRO shaft sealing ring has an overall height of 7mm instead of the 6.5mm usual with other manufacturers. The BGM PRO shaft seal is based on the original old model from Piaggio. Anyone who takes apart an old original engine will [...]

bgm - Item number: 708090 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Carburettor> Sockets Other customers who are interested in vacuum connection -BGM ORIGINAL- M6 (SW = 8, with O-ring, Ø inside = 3,5mm, Ø outside = 6,1mm, length = 30mm), also looked for: vacuum connection | [...]

bgm - Item number: BGM2246 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Motor> Motor housing> Stud bolts Other customers who are interested in stud bolt set Lambretta engine cover -BGM ORIGINAL- LI (series 2-3), LIS, SX, TV (series 2-3), DL, GP are interested, also searched for: stud bolts | Set | [...]

bgm - Item number: 7674550 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Clutch> Spacer Other customers who wanted spacer set clutch cover -BGM PRO 4- Teilig- V50, PV125, ET3, PK50, PK80, PK125 - 1.5mm are interested, also looked for: Spacer | Set | Clutch cover | [...]

bgm - Item number: 3333226KT Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame> Shock absorbers> Screws Other customers who are interested in screw set rear shock absorber -BGM ORIGINAL- M9 x 70mm extra long, SW14, galvanized- used for YSS / BGM PRO SC shock absorber / motor - Vespa V50, PV, ET3, [...]