The BGM PRO variator dethrottles the drive and enables significantly better acceleration and a higher top speed. The roller tracks have been specifically calculated for each model. The sliding surface of the belt has been optimized for better grip. Thanks to the very good sliding properties of the rollers (including a sliding varnish-coated riser disc), this variator - completely gentle on the engine - already brings up [...]

Reinforced locking ring from BGM Pro with increased material thickness and greater pre-tensioning force. This has holes so that it can be easily used with circlip pliers. The BGM Pro retaining rings are an ideal addition to all clutch baskets, especially if they are equipped with strong springs. All BGM Superstrong couplings from 2017 contain this ring type in series. bgm [...]

BGM Pro Sport tires (3.50-10) fully assembled on aluminum sports rim BGM Pro tubeless (2.10-10) Ready-to-assemble tire set consisting of the first-class BGM Pro sports tires with a speed index S (approved up to 180km / h) and a load index of 59 (243kg per Tires) as well as the exclusive BGM Pro light alloy wheel *. SUITABLE The set is available on all Lambretta series 1-3 models as well as [...]

MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, which means that it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is forged and then CNC machined. STORAGE The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC racing camp and [...]

Precisely manufactured shift pin for all largeframe transmissions from approx. Year of construction 1984 - Vespa PX, T5, Cosa, Motovespa TX. Always used with a flat type switch cross. If a non-flat switch cross is installed in your engine and a washer is also installed between the switch bolt and the switch cross, the bolt shown here cannot be used. You have [...]

BGM Pro shims for the clutch are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. WHY The shim is needed to distance the clutch in the engine. It is installed under the coupling pinion and is available in thicknesses of 0,8-1,6 mm (in 0,2 mm increments). [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Set of engine oil dipstick and gear oil dipstick BGM PRO made of CNC milled, high-strength aluminum. Available in silver or black anodized Suitable for all Piaggio Leader / Quasar 125-300ccm engines 1: 1 replacement for the original plastic dipstick No tools required High-quality manufacture (dipstick with thread + high-strength screw adhesive secured in the head) Incl. O-ring Ready for direct installation ENGINE OIL CHECK Do not run the engine warm, if necessary [...]

We can offer a spring with a 16% higher spring rate to match our TÜV-tested BGM Pro SC / F15 shock absorbers. Ideal for vehicles with a lot of payload or in racing. Without test mark, therefore only for the racetrack. bgm - Item number: BGM7783SPH15 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. [...]

Modern designed turn signal pair with E marking, which fits perfectly with the bgm rear light. Cannot be installed in conjunction with a downhill handlebar. For problem-free operation of the indicators, please order our electronic flasher relay BGM6203 at the same time. bgm - item number: BGM5000LI Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,35 kg [...]

Replacement piston, for the original Vespa - 200cc cylinder. Complete with piston rings, bolts and clips, of course. Installation clearance: 0,21 (Italian dimension) bgm - item number: 9020177 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,34 kg Category: Motor> Cylinder> Piston Other customers who for piston -BGM ORIGINAL- [...]

bgm - Item number: BGM6606GTS Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Electronics> Turn signals Other customers who are looking for cable adapter kit for turn signal conversion -BGM PRO update 2003-2013 => 2014- Vespa GTS 125-300 rear - used for indicators from 2014 onwards in vehicles before 2014 are interested, [...]