bgm - Item number: BGM79N06 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Fork> Nuts Other customers who are looking for a headset lock nut h = 6mm -BGM ORIGINAL- Vespa 125 VN1, VN2, VNA1T, VNA2T, VNB1T, VNB2T, VNB3T, VNB4T, VNB5T, VNB6T, Vespa 150 VL1, VL3T, VB1, VBA1T, VBB1T, [...]

bgm - Item number: BGM6412FB Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Frames> Cables> Cables Other customers who want front brake cables -BGM ORIGINAL- Vespa PX ( -1984) - black, also looked for: Brake cable | Brake cable | Brake cable | Front | Shell | [...]

For permanent fixation, stickers need a clean, smooth and degreased surface. Our brake cleaner, for example, is very suitable for degreasing. In the case of larger areas to be glued, it is always an advantage to spray the area with a little water before gluing. The water can also be mixed with a few drops of detergent to make it [...]

Fine-knitted glove BGM Protection A breathable back of the hand ensures extra comfort. 100% nylon fine knit for a perfect fit. The PU coating ensures optimal grip and a high sense of touch. At the same time, it protects the palms from dirt and oil. Ideal for work that requires both a high level of protection and a good sense of touch. 100% polyamide black black [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

The quality of the bgm ORIGINAL CDIs is at the OEM level. In addition, they are open CDIs. This means that no speed limiter is integrated in the CDI. This allows your engine to rev up to the max. The bgm ORIGINAL CDIs are subject to very strict quality controls. This ensures that: a constant and strong ignition spark over the entire engine speed range [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM7707A Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Shock absorbers> Shock absorber mountings Other customers who are looking for spring plates for shock absorber springs in front, top fork / swing arm -BGM PRO- Largeframe Sprint (VLB1T), Rally (VSD / VSE), GT / GTR125 (VNL2T), Super (VNC / VBC), TS125 (VNL3T), VNA, VNB, VBA, VBB, [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

This allows the piston to be blocked. Is often used to adjust the ignition with the reversal measurement method. bgm - Item number: BU4932 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Engine> Tools> Tools Other customers who are interested in piston stoppers -M10 x 1,25- ( Type NGK C-candle), searched [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]