High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with Grimeca or LML brake pumps. Suitable for Vespa PX from 1998-2003 as well as all LML vehicles / brake pumps. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal [...]

The proven BGM Superstrong clutch is now also available for the Vespa GS150 / GS160 and SS180 models. The coupling is delivered ready for installation. It replaces the serial coupling of the GS / SS models 1: 1 and can usually * be used without further modifications. The clutch is available with 22 teeth (like the original) or with 23 teeth (longer reduction). Helical teeth [...]

Carburetor -PHVA 17,5- Piaggio 50ccm. The PHVA carburettors are a constant in the scooter sector. They are characterized by easy assembly and good tunability. If a DellOrto PHVA carburettor is already installed on the vehicle, changing to a larger one of the same type is possible without any problems. The PHVA 17,5 mm helps all 70s [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

bgm - Item number: BGM4962 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,71 kg Category: Frame> Body> Main stand Other customers who are interested in main stand -BGM PRO Soft Stop System Ø = 20mm- Vespa Smallframe V50, V90, PV125, ET3 - Galvanized are interested, also looked for: Main stand | Stand | [...]

Remote air filter system based on the bgm PRO suction hose and a Marchald foam air filter. bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm [...]

Lockable stainless steel tank cap for the Vespa PX Lusso and PK XL. High-quality processed and very practical - because lockable- tank cap for the Vespa. Offers ideal protection against the rarer 2-stroke mixture thieves and the common sugar lump throwers. bgm - item number: 5250040 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,21 [...]

The BGM Superstrong for Lambretta already has a "built-in" clutch compressor system. The Superstrong coupling can be easily compressed with just two screws and long nuts. On the face of the coupling spider, two of the legs are marked with a point, at the bottom of which is the threaded hole for the screw. Here the screws are used for pre-tensioning [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

BGM abutments are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Innocenti. This guarantees a perfect fit. The abutments are required to give the outer cable casing a stop on the frame or in the engine block. They are simply inserted into the corresponding hole. Uses [...]

bgm - Item number: BGM8505S Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Service> Carburetor components Other customers who are interested in float needle -BGM PRO- for Keihin PWK 20, 22, 24, 26, 28, Polini CP Ø = 17,5-24mm, Polini 28, 30, 32, 34 are interested, also looked for: [...]