BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Piaggio specific plug with enclosed contact clamps. A defective cable harness can be repaired or cable branches or entire cable harnesses can be created yourself. Simply connect the cables to the plug contact (crimp or solder with the appropriate pliers) and then push them into the plug. The contact locks in automatically and is then permanently connected to the plug. Two contacts: [...]

Starter motor- Piaggio, Gilera, Peugeot 50cc. Not suitable for Sfera80, TPH80. Please use 7674456 here. bgm - Item number: BU7200 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,38 kg Category: Engine> Gearbox> Starter motors Other customers who are interested in starter motor - starter -BGM ORIGINAL- Piaggio 50 ccm 2-stroke, [...]

Conversion brake arm including brake cam for easy conversion of the rear brake cable to modern thread technology. This means that the old type can be retired with a brake cable safety device simply by clamping. The new technology allows quick and safe adjustment using a knurled nut. Also ideal in racing when the engine is changed frequently or the brake needs to be readjusted quickly. [...]

bgm - Item number: BGM7772BU Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Shock absorbers> Bushings Other customers who are interested in bushings for rear shock absorbers -BGM PRO R12 V2 Black Edition, 300-310mm- Lambretta LI, LIS, SX, TV, DL, GP are also interested in: Shock absorbers [...]

bgm - Item number: 7675852 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Exhaust> Gaskets Other customers who are interested in gasket exhaust manifold / cylinder -BGM ORIGINAL, Vespa XL, M8 hole stitch 55-62mm, Ø inside = 33,5mm- Vespa V50, PV125, ET3, PK S, PK XL are interested, also looked for: [...]

Solid BGM crankshaft for the PX80 models. The PX80 was manufactured for the German market and has a stroke of only 48mm (PX125 = 57mm). The most common damage to the PX80 engines is a defective lower connecting rod bearing, mostly caused by long idle times or worn connecting rod thrust washers. The BGM crankshaft has a solid bearing and [...]

New version of the popular BGM ORIGINAL rims The bgm Original V2.0 rims are precisely manufactured and have an exact concentricity. High-quality stud bolts and nuts make them the perfect, higher-quality alternative to the Piaggio original rims. The bgm original rims have a subtle bgm logo and an embossed size indication. The rims can be used with [...]

Cylinder base spacer for the Malossi cylinder Sport and MHR with 210ccm. This can be used to support the cylinder in order to increase the steering angle that is important for performance. The MHR cylinder in particular has turned out to be a very grateful candidate for a lift, despite its much larger flushing cross-sections than its predecessor. A prerequisite is an environment that corresponds to the cylinder, such as [...]

bgm CDI with integrated ignition coil for all electronic Vespa and Lambretta ignitions based on the so-called Ducati ignition. Here in the complete kit with a suitable spark plug cable and spark plug connector with the corresponding rubber seals. Suitable for: Vespa PX Vespa PE Vespa T5 Vespa PK Lambretta DL / GP electronic Lambretta with conversion to electronic ignition All Vespas [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

IGNITION CABLE BGM PRO SILICONE 7MM The BGM Pro silicone ignition cable is a real professional product. The tinned copper wire with 1,5mm² enables a powerful spark under every condition. It is suitable for retrofitting on every motor and offers the following advantages compared to a standard PVC cable: High voltage resistant up to over 50000V (50kV) Heat resistant up to 200 ° (fire protection class FT-1 / VW-1) Copper core [...]