Latest version of the Lambretta bgm shock absorber. Compared to its predecessor, many details have been further optimized. The biggest innovation is the ability to adjust the height of the shock absorber by 10 mm. This allows additional space to be created between the frame and the suction cup. New features: bushings with silent rubbers mounted progressively wound spring rebound and compression damping with hard marking [...]

Throttle cable elbow set, as it is used as standard on our BGM carburettors. The throttle cable guide is not screwed tightly into the carburetor cover, but remains pivoted. The guide is attached with a clip on the underside. In this way, covers that have a thread (which may be defective) can be converted or reused without any problems. Including solid brass adjusting nut for [...]

Cylinder base gasket -BGM PRO- 1,5mm Polini 177ccm bgm - item number: 3820041 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are Interested in spacer cylinder base -BGM ORIGINAL Polini / Parmakit 177 ccm- Vespa PX80, PX125, PX150 - 1.5mm, searched [...]

bgm - Item number: BGM6412SC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Frames> Trains> Speedometer cables Other customers who are interested in speedometer cables -BGM ORIGINAL- Vespa PX old ( -1984) - black, also looked for: speedometer cable | Speedometer cable | Drive shaft | Speedometer drive shaft | Speedometer drive shaft | [...]

Complete locking set for the auxiliary shaft of Vespa largeframe engines such as PX, T5, Cosa, Rally Contains 1x washer 1x locking washer 1x nut M9 / SW17 Tightening torque of auxiliary shaft nut: 30-35Nm The reinforced BGM primary repair set (BGM0195F48) and the auxiliary shaft set ( BGM6503PKT) bgm - item number: BGM6503NKT Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: [...]

The BGM PRO SC / F16 is the first sport shock absorber specially developed for the swing arm of the Vespa GS160 / GS4 / SS180 models! During development, attention was paid to the special requirements of the large models with their high possible payload and top speed, and the damper was designed accordingly. So it is not just a converted damper [...]

bgm - Item number: BGM2112 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Motor> Gearbox> Variomatic weights Other customers who are interested in weights -BGM ORIGINAL 21x17mm- 11,5g interested, also searched for: weights | Role | Vario roll | Variator roller | Vario rolls | Rolls | Variator | [...]

Gear oil dipstick BGM PRO made of CNC milled, high-strength aluminum. Available in silver or black anodized Suitable for all Piaggio Leader / Quasar 125-300ccm engines 1: 1 replacement for the original plastic dipstick No tools required High-quality production (dipstick with thread + high-strength screw adhesive secured in the head) Incl. O-ring ready for direct installation TRANSMISSION OIL CONTROL Place the vehicle on a level surface. Unscrew the oil dipstick [...]

bgm - Item number: BGM0292HS15 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø52.5mm- Vespa PX125, Cosa125, GT125, GTR125, TS125, Super125 - 1.5mm are interested, also looked for: Spacer | Cylinder head | Distance seal [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Super practical helper if the clutch needs to be changed when the vehicle is stationary. bgm - Item number: 8099015 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,17 kg Category: Motor> Tools> Tools Other customers who are interested in clutch centering aid -LAMBRETTA- LI, LIS, SX, TV (series 2-3) are interested, searched [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]