Corresponds to the original spare part, so in the very best quality. Great replacement for anyone struggling with problems caused by a defective old stator plate. bgm - Item number: SR1630851 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,61 kg Category: Engine> Ignition> Ignitions Other customers who are interested in [...]

Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

Open intake manifold for all Piaggio scooters with 2-stroke engine housing (50cc, 125cc, 180cc). The carburetor stands straight back and offers a crisp, short intake path for a clean turning behavior. Better acceleration, free turning and higher top speed! Due to the changed installation position of the carburetor, the original connection hose to the air filter box can no longer be used. With a Ø30mm connection width, [...]

BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]

The connecting rubbers from BGM from the carburettor to the intake manifold with the connection size Ø = 28.5 / 28.5mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. Suitable for: - [...]

BGM Pro cable branch to supplement the BGM Pro conversion wiring harness for use with a Vespatronic ignition. PROBLEM The cable colors of the Vespatronic ignition differ greatly from the conventional color scheme of a Piaggio cable harness for electronic ignitions (which is also continued in the BGM Pro conversion cable harness). Piaggio / BGM use green (engine off), blue (luminous flux), black (ground). SOLUTION The BGM Pro cable branch [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with HengTong type brake pump. Suitable for Vespa PX built in 2004-today. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal for braking with only two [...]

The bgm PRO silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. The reinforced rubbers have asymmetrical degrees of hardness. Therefore, the driving comfort is maintained despite the tighter suspension. With the reinforced bgm engine silent rubbers supplied in pairs, the chassis gains directional stability, steering precision and rigidity. The assembly is easy and offers eg [...]

Anyone who does tuning at the highest level can choose the best material available on the market when choosing their crankshaft bearings. We have put together BGM PRO bearing sets for you here. In addition to quality bearings, the kit also contains high-quality shaft seals. All bearings are C4 bearings with increased internal clearance. In contrast to the original [...]

We can offer a spring with a 16% higher spring rate to match our TÜV-tested BGM Pro SC / F15 shock absorbers. Ideal for vehicles with a lot of payload or in racing. Without test mark, therefore only for the racetrack. bgm - Item number: BGM7783SPH15 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. [...]

BGM adjusting screws are manufactured in an excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. As in the original, the adjusting screws have an extra high lock nut. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6495S30 Availability: in stock (Please [...]

Lambretta cylinder base gasket with a thickness of 2,0 mm for the small engine blocks with 125-193 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, turned cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.