Float needle BGM PRO Viton ® for Dell'Orto carburettor The float needle regulates the flow of petrol into the carburettor. If the float needle is defective, the carburetor overflows and the gasoline drips onto the floor and / or into the engine. The result is often a poorly starting and smoking engine. If the carburettor is revised, it is therefore useful [...]

The bgm PRO Superstrong is the plug n play coupling solution for small frames - Made in Germany. Special features: Ready-to-install 4-disc clutch with organic racing pads Spring force (springs BGM XL) designed for up to 22HP / 20Nm Separates perfectly cold and warm Easy to use No changes to the cover / housing necessary Without keyway (half-moon wedge) Manufactured and assembled in Germany Delivered ready for installation [...]

Lambretta cylinder head gasket with 1,0 mm thickness and 71,0 mm diameter. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0244 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head [...]

The float level of the SI carburettors is not adjustable. If the float level is too low, it comes to full load jerks and a dangerous emaciation. This can be due to the use of a Cosa float chamber on a SI24 / 24E carburettor of the PX models. The swimmer of the Cosa lies lower and reduces the swimmer's level. The spacers offered here raise [...]

bgm - Item number: SC4011 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Rubber parts> Seals Other customers who are interested in sealing fuel tap inside -BGM ORIGINAL 26x4mm- Vespa Wideframe VN, VM, ACMA cork are also interested in: Seal | Tank | Frame | Sight glass [...]

Revised version of the proven Lambretta bgm PRO train set. The well-known features such as the correct length of the outer and inner sleeves, the outer cable with a PE sleeve for easy operation and the detailed plan for laying the cables have of course been retained. The many small improvements in detail are new, the end sleeves are now double pressed, the inner cables are [...]

The bgm EVOLUTION crankshafts are very cleanly processed and convince with well thought-out details: performance-optimized full-beam design well balanced (special balancing that is only available with the BGM PRO shafts) stable connecting rod available with 52mm (std.) And 55mm stroke The long stroke version with 55mm stroke has a longer connecting rod (110mm instead of the 105mm series). This ensures [...]

Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The motor housing is protected. Used to mount the ball bearing type 6204 on the crankshaft of the Vespa Smallframe models. The tool supports itself [...]

bgm - Item number: 3330287 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gaskets> Gaskets Other customers who are looking for gasket cylinder head -POLINI 133 ccm Evolution- Vespa PV125, ET3 125, PK125 - 1,5mm are interested, also looked for: Seal | Cylinder head | Head gasket | Cylinder head gasket [...]

Clever maneuvering aid for all Vespa GT, GTS, GTL and GTV scooters. Perfect for moving the vehicle quickly and easily in a tight garage. To do this, place the vehicle on the side stand. Place the two-part maneuvering aid under the scooter, put it together and fix it quickly and easily with the wing screw. Now just jack it up with the main stand. Now can [...]

The bgm Pro clutch pressure plates are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) and then case-hardened. The precisely defined surface hardening to 58-60HRC makes the plates extremely resistant to wear. The plates are then precisely sanded, so that the pressure pad with a flat and hard surface finds perfect working conditions. The pressure plates are manufactured exactly according to Piaggio original dimensions. Always [...]

Remote air filter system based on the bgm PRO suction hose and a Marchald foam air filter. bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm [...]