High quality new edition of the cable boxes for the classic Vespa PX. Here in a special version for the PX models not launched in Germany until 1984 WITHOUT a battery. The wiring harness of these vehicles already has a round connector on the ignition side, like the later PX Lusso models. Therefore this box is higher than that of the German [...]

Cylinder base gasket -BGM PRO- 0,8mm Malossi 139ccm & 166ccm (aluminum) bgm - item number: WS5160 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder base -BGM ORIGINAL Malossi 139/166 cc- Vespa PX80, PX125, PX150 - 0.8mm, [...]

Perfectly suited to block the drive via the clutch basket and to be able to loosen the clutch nut, screw of the front sprocket and even the fan wheel nut. bgm - Item number: 8099003 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,24 kg Category: Motor> Clutch> Tools Other customers who are interested in [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

Tuning cylinder 150ccm BGM PRO suitable for Vespa VM, VN, VB1, VGL1, VL1 BGM PRO cylinder with 150ccm with 57 mm stroke suitable for all 2-channel engines. The cast iron cylinder has three transfer ports and is suitable for all wideframe motors with a 57 mm stroke. The cylinder with the 125 mm crankshaft fits on the 54 cc engines with 57 mm stroke.

bgm - Item number: BGM4590KTGY Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,24 kg Category: Frame> Brakes> Frame parts Other customers who are looking for cover brake pump set -BGM PRO, without Mirror holes- Vespa GTL125 / 200 (ZAPM311, ZAPM312), GTS125 (ZAPM313), GTS250 (ZAPM451), GTS300 (ZAPM452), GTS ie Super125 (ZAPM453), GTS ie Super300 [...]

bgm - Item number: BGM6412ST Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frames> Cables> Cables Other customers who are interested in choke cables -BGM ORIGINAL- Vespa PX (- 1984), Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), GT125 (VNL2T), GTR (VNL2T), TS125 (VNL3T), GL150 (VLA1T) - black interest, [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

BGM PRO STREET transmission oil SAE30 * - API GL3 Classic single-grade oil, as prescribed by Piaggio for all Vespa manual motors. Covers everyday load conditions perfectly and is ideal for series engines through to high-end tuning engines. Mildly alloyed, ideally suited for oil bath clutches Well-adhering, pressure-resistant lubricating film Excellent oxidation stability Wear-inhibiting * The specification SAE30 refers, differently [...]

Motor housing bolt set that contains all removable motor bolts of the motor housing. The bolts are made of high-strength steel (10.9) and are permanently protected against corrosion by a browning process. Also included are the snap rings, washers and nuts, all of which are galvanized. The set corresponds to the original dimensions used ex works and is a high-quality 1: 1 replacement for the original [...]

bgm - Item number: 4940062 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Motor> Brakes> Brake arms Other customers who wanted rear brake arm -BGM ORIGINAL- Vespa T5 125cc interested, also searched for: brake arm | Rear | Brake lever arm | Brake cable holder | Arm | Rear | [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]