bgm - Item number: 7675852 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Exhaust> Gaskets Other customers who are interested in gasket exhaust manifold / cylinder -BGM ORIGINAL, Vespa XL, M8 hole stitch 55-62mm, Ø inside = 33,5mm- Vespa V50, PV125, ET3, PK S, PK XL are interested, also looked for: [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Silent rubber at the rear, shock absorber mount in the engine block. This rubber takes the lower mounting fork of the rear shock absorber. Therefore, the good condition of this rubber is essential to keep unpleasant vibrations and oscillations away from the driver and to ensure that the damper is guided properly. Length: 34,5mm Ø outside: 30mm Ø inside: for 15mm bolts This version is longer than the [...]

bgm - Item number: BGM2758 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 58mm -BGM ORIGINAL- Vespa Smallframe V50, PV125, ET3, PK are also looking for: Engine housing bolts | Motor housing studs | Set | [...]

bgm - Item number: BGM2112 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Motor> Gearbox> Variomatic weights Other customers who are interested in weights -BGM ORIGINAL 21x17mm- 11,5g interested, also searched for: weights | Role | Vario roll | Variator roller | Vario rolls | Rolls | Variator | [...]

Front headlights with 2x 35 watt halogen power! Suitable for Yamaha Aerox / MBK Nitro. The headlight unit not only brings you an extremely bright and brilliant light, the optics are also much more modern and adult than the old series headlights. The lamps can be switched separately. With E-mark (can be used in traffic without registration)! bgm - Item number: BGM5091 Availability: [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

The quality of the bgm ORIGINAL CDIs is at the OEM level. In addition, they are open CDIs. This means that no speed limiter is integrated in the CDI. This allows your engine to rev up to the max. The bgm ORIGINAL CDIs are subject to very strict quality controls. This ensures that: a constant and strong ignition spark over the entire engine speed range [...]

Lambretta bgm PRO MRB RaceTour piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

Connection rubber -BGM ORIGINAL- with 34 mm connection width. High-quality connecting rubber for carburettors with 34 mm connection width, such as: bgm PWK 24 bgm PWK 28 bgm PWK 30 Keihin PWK 28 Mikuni TM 30 Mikuni TM 27 Dellorto PHBH 28 Dellorto PHBH 30 Dellorto VHST 28 The rubber has an inner one for a perfect fit on each side [...]

bgm - Item number: BGM1212BG2A Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Engine> Seals> Seals Other customers who are interested in gasket cylinder base -BGM ORIGINAL 125-150 ccm , 2 channel VNA, VNB, VBA, VBB, VNC, VLB, Sprint, GT are interested, also looked for: