The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Kickstater shaft for Peugeot, Honda and Kymco In very good OEM quality bgm - Item number: 06555741 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Gearbox> Kick starter shafts Other customers who are interested in kick starter shaft -BGM ORIGINAL- Peugeot 50 cc, Honda 50 cc, Kymco 50 cc, [...]

Steering tube BGM PRO Vespa PK XL2 - modified for use on Vespa Largeframe (around 1961-1979) e.g. Super 125/150, Sprint150, Rally180 / 200, GT / GTR125, TS125 Motovespa DS200, Sprint / GS150 (04C), GT160 (09C ) PROBLEMS OF THE OLD ORIGINAL FORKS The forks of the old Vespa largeframe models have antiquated damping and suspension kinematics. Due to the design, the chassis hits quickly when braking hard ('goes [...]

bgm - Item number: BGM2225G Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Seals> Seals Other customers who are interested in cylinder gasket set -BGM PRO MRB-Racetour 225 ccm Lambretta TV 200, SX 200, DL 200, GP 200 are also looking for: Seal kit | Cylinder [...]

We recommend BGM Pro Street gear oil (BGM2025, corresponds to specification API GL-3) as a lubricant. bgm - Item number: BGM6225G Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,23 kg Category: Motor> Clutch> Gearbox Other customers who are looking for clutch pinions -BGM PRO- Vespa Cosa2, PX (1995-), BGM Superstrong, [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. The pear nipples used with the brake / clutch cable require a corresponding adapter to fit into the round cutout of the handlebar. Unfortunately there are no [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

High-quality thrust block made of high-strength 42CrMo4. Better and cheaper than the original. bgm - Item number: SC9000 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Gearbox> Gearbox Other customers who are looking for thrust block for shift claw -BGM PRO- Vespa V50 , V90, SS50, SS90, PV125, ET3, [...]

BGM Pro shims for the clutch are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. WHY The shim is needed to distance the clutch in the engine. It is installed under the coupling pinion and is available in thicknesses of 0,8-1,6 mm (in 0,2 mm increments). [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, which means that it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is forged and then CNC machined. STORAGE The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC racing camp and [...]

Auxiliary jet set -BGM PRO Dellorto PHBG- MA- (30-50) bgm - item number: 7671257 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Carburetor> Carburetor- Nozzles Other customers who were interested in auxiliary nozzle set -BGM PRO for Dellorto (type: 1488) PHBG- MA- (30-50) also looked for: auxiliary nozzle set | [...]