BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

BGM Pro shims for the clutch are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. WHY The shim is needed to distance the clutch in the engine. It is installed under the coupling pinion and is available in thicknesses of 0,8-1,6 mm (in 0,2 mm increments). [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM77TL Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Fork> Tools Other customers who are interested in tools for spring preload -BGM PRO- series for Shock absorbers of the series BGM PRO R12, BGM PRO SC / R12, BGM PRO SC / F16 [...]

BGM Pro SC SPORT shock absorbers -Sporty- Comfortable -Adjustable-With TÜV- Sportiness paired with outstanding optics. With factory pre-configured damping, spring preload (pre-load) continuously adjustable. HARMONIOUS The BGM Pro SC SPORT coilover kit convinces with its harmonious basic set-up. Intended for sporty driving on the road, the predefined specific damper setting and spring rate is an optimal balance of sportiness and suitability for everyday use. [...]

High quality ignition base from BGM. Specially developed for converting contact-controlled motors to maintenance-free electronic ignition. The base plate has been modified to fit the engine housing built before 1977 and has a longer cable branch so that the ignition base plate can also be perfectly mounted on older vehicles. After the conversion, the former 6Volt on-board network has [...]

Very good OEM quality bgm - item number: 950308 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Kick starter pinions Other customers who are looking for kick starter pinions with spring -BGM ORIGINAL - Are interested in CPI 50 cc, also searched for: Kickstart pinion | Kick starter wheel | Kick starter drive | Kicker pinion | [...]

Practical quick coupling that is mounted in the fuel hose. If, for example, the tank or the carburettor is to be removed, the hose at the coupling is disconnected. The internal valves prevent fuel leakage on either side of the clutch. They can be separated quickly at the push of a button with just one movement and can be easily closed again by sticking them together. [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

Precision measuring tool for determining the top dead center and the ignition point. The suitable holder for mounting in place of the cylinder head is included. bgm - Item number: 8099009 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,41 kg Category: Workshop requirements> Tools Other customers who are interested in dial gauge -BGM ORIGINAL- Universal 0,01-10mm - [...]

BGM PRO Superstrong - the original Extremely resilient coupling, very easy to use - Made in Germany The Superstrong coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and extremely high torsional rigidity. It offers a [...]