Ignition coil -BGM PRO- Minarelli 50ccm (Yamaha ignition) bgm PRO Racing ignition coil with high-end secondary winding. With this coil, the secondary voltage is almost doubled. The standard ignition voltage of the original ignition coil is around 16.000V. With the race high tension coil ignition coil from BGM PRO we achieved an ignition voltage of a full 31.000V !!! The advantage lies in the better [...]

The auxiliary nozzle of the SI carburetor does not have the simple function of a conventional nozzle, ie the pure regulation of the amount of fuel. With the introduction of the PX in 1977, the previously used SI carburettor type and its auxiliary nozzles were modified. The old carburetor types, such as those still used in the rally engines, had a separate air duct for the auxiliary nozzles. [...]

Repair kit BGM PRO for the primary reduction of BGM PRO with straight-toothed primary gear (62/63 teeth) for Vespa Wideframe engines, e.g. Vespa VM, VN, VL, VB, VNA, VNB, VBA. The springs contained in the large primary gear serve as shock absorbers. They protect the gear unit from high load peaks. If they are too soft in relation to the engine torque, they are completely [...]

bgm - Item number: BGM2225BS07 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder base -BGM PRO RaceTour- Lambretta SX 200, TV 200, DL / GP 200 - 0,7mm are also looking for: Spacer | Cylinder base | Distance seal [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Chrome-plated tank cap that is lockable. Suitable for almost all Vespa models from 1948 to 1984. Exceptions are the Rally and SS180 / GS160 models that have a longer arm. Included. 2 Keys. Great quality. Like the original cover, it can be hung with bolts and then opened. (US) bgm - Item number: 5250034 Availability: in stock (Please check [...]

Cable harness BGM ORIGINAL suitable for all Vespa PX models up to year of construction 1982 Italian version without battery. With this, the indicators, the horn (so-called buzzing) and all other consumers are supplied with power directly via the AC on-board network. The ignition base plate used in these vehicles is suitable for this with only 3 cables (contact ignition models) or 5 cables (vehicles).

England was the only market where Lambretta sales outpaced Vespa sales. The main reason for this is the excellent marketing strategy of the Lambretta Concessionaires. The success story of the Lambretta is documented extensively and in great detail in Stuart Owen's book about the Lambretta Concessionaires (Article No. 3332513). In addition to special models and special color combinations, there was also the Pegasus bench. The was [...]

bgm - Item number: BGM2200H Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Engine> Cylinders> Cylinder heads Other customers who are interested in cylinder head -BGM PRO MRB-Racetour 195 ccm - Lambretta LI 125-150, LIS 125-150, SX 150, DL 125-150, GP 125-150 are interested, also looked for: cylinder head | [...]

Super practical helper if the clutch needs to be changed when the vehicle is stationary. bgm - Item number: 8099015 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,17 kg Category: Motor> Tools> Tools Other customers who are interested in clutch centering aid -LAMBRETTA- LI, LIS, SX, TV (series 2-3) are interested, searched [...]

bgm - Item number: BGM1770BS15 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are looking for Spacer cylinder base -BGM ORIGINAL 177/187 ccm - Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 1,5mm interested, searched [...]

The BGM PRO assembly kit for handlebar end mirrors can be used universally for all motorcycles and scooters. With the adapter, a handlebar end mirror can be mounted quickly and easily. No modifications to the fittings or the handlebars are necessary. (Vehicles whose rubber grips are still closed at the end can be equipped with open grips or, alternatively, the existing grips with [...]