Open intake manifold for Minarellis with horizontal cylinder Intake manifold with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). The result is better acceleration values ​​and freer turning and thus higher top speed. Very subtle, since the original airbox [...]

BGM clamping plate sets as well as their individual parts are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high material quality enables reliable clamping of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6482S Availability: in stock [...]

Cracked! A pull rope can digest incredibly large loads. The tear limit of the trains we offer is several tons of pulling force. In a pinch you can even tow cars with it. Why a train breaks anyway depends on the fact that it is loaded incorrectly. Zugkiller No. 1 is the so-called common cast ridge. The brake-clutch levers are often [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Complete replacement piston kit. bgm - Item number: 5660048 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Cylinders> Pistons Other customers who are interested in pistons -BGM ORIGINAL- Piaggio 50 ccm - 40,0mm interested, also searched for: Pistons | Cylinder piston | Piston | Pistone | [...]

bgm - Item number: BGM8800Y Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Clutch> Springs Other customers who are interested in clutch spring set for BGM PRO Superstrong clutch - BGM PRO XL- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

High-quality CNC sports levers from bgm PRO for vehicles with cable brakes at the front. Suitable for Vespa Largeframe models built in 1957-1998: PX, T5, Sprint, Rally, GT, GTR, TS, VNA, VNB, VBB, VBA, GS, SS180 Smallframe built in 1963-1989: V50, 50N, V90, PV125, ET3 , PK S *, PK XL1 * Milled from solid aluminum, with an elegant, resistant, hard-anodized surface. Ergonomically clear [...]

Intake manifold -BGM PRO- Piaggio 2-stroke - CS = 28mm. Open intake manifold for the Piaggio 2 stroke engines. With it you can finally drive a really large carburetor (Areche 24 mm, Dellort 22-25 mm). With this you can really give your engine the spurs. The motto is more power thanks to more fuel. The design is both [...]

The BGM clutch linings are manufactured according to special specifications in order to obtain a high-quality, organic lining mixture. This is both pressure and temperature stable and offers the friction disks a good grip. This means that the full torque is always transferred to the gearbox and quick starting processes are also easily handled. A clutch equipped with BGM linings separates due to [...]

The proven BGM Superstrong clutch is now also available for the Vespa GS150 / GS160 and SS180 models. The coupling is delivered ready for installation. It replaces the serial coupling of the GS / SS models 1: 1 and can usually * be used without further modifications. The clutch is available with 22 teeth (like the original) or with 23 teeth (longer reduction). Helical teeth [...]

bgm - Item number: BGM6487X Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,40 kg Category: Frames> Wheels> Clamp nipples and screw nipples Other customers who are interested in clamping plate set brake pedal -BGM ORIGINAL- Vespa Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), GL150 (VLA1T), Super, [...]