Clutch linings BGM PRO TOURING Alu type COSA2 Perfect symbiosis of racing technology and reliability for touring riders Suitable for all conventional Cosa2 clutch baskets (strap width as original, 14mm) Aluminum carrier material with reinforced contact surface on the straps Sintered lining material such as Honda CR80 in a wide design The BGM PRO Touring Alu pads combine the advantages of the popular CR80 racing pads with [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with Grimeca or LML brake pumps. Suitable for Vespa PX from 1998-2003 as well as all LML vehicles / brake pumps. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal [...]

bgm - Item number: BGM2585 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Carburettor> Spacer Other customers who are looking for intake manifold spacers -BGM PRO Malossi / Polini-Vespa PX80, PX125, PX150, PX200, Sprint, Rally180 (VSD1T), Rally200 (VSE1T) - 6mm are interested, also looked for: Intake manifold spacer | Spacer [...]

Diaphragm plates are subject to natural wear, similar to piston rings and clutch shoes. The membrane plates should therefore be replaced at regular intervals. With the bgm ORIGINAL membrane blocks we offer you a cheap replacement in original equipment quality. Since everything is already pre-assembled, the change is quick and easy even for inexperienced screwdrivers. bgm - Item number: R100560020 Availability: on [...]

Shock absorbers from the BGM PRO SC series are THE coilover kit for Vespa with TÜV! The chassis developed by BGM in Germany is available with an ABE for almost all Vespa scooters. The shock absorbers are fully adjustable and offer an incomparable driving experience that was previously unknown on a scooter. with ABE individually [...]

Revised version of the proven Lambretta bgm PRO train set. The well-known features such as the correct length of the outer and inner sleeves, the outer cable with a PE sleeve for easy operation and the detailed plan for laying the cables have of course been retained. The many small improvements in detail are new, the end sleeves are now double pressed, the inner cables are [...]

bgm - Item number: BGM2225BS05 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder base -BGM PRO RaceTour- Lambretta SX 200, TV 200, DL / GP 200 - 0.5mm are also looking for: Spacer | Cylinder base | Distance seal [...]

The proven BGM Superstrong clutch is now also available for the Vespa GS150 / GS160 and SS180 models. The coupling is delivered ready for installation. It replaces the serial coupling of the GS / SS models 1: 1 and can usually * be used without further modifications. The clutch is available with 22 teeth (like the original) or with 23 teeth (longer reduction). Helical teeth [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

BGM Pro Sport bench made by Nisa Italy Based on the very popular Nisa 'Sport 20' bench, we had a BGM version made by NISA. AUTHENTIC LOOK The BGM Pro Sport bench has a beautiful Alfatex cover (embossed waffle pattern) on the sides and back and is also available with gray piping. The seat is also [...]

Grip, cornering, directional stability, handling, wheelspin, braking behavior? All of these are demands that your chassis must be able to cope with. bgm offers the right damper for every application. The bgm PRO series offers you high tech at its best. You can not only adjust the spring tension of the black and white gas pressure shock absorbers to your individual needs, they also offer you [...]

Lambretta cylinder base gasket with a thickness of 3,0 mm for the large engine blocks with 200-250 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, twisted cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.