Contains the most useful needles for tuning the PWK series from 21-30mm Kyajet - PWK tuning tool (click) bgm - item number: 2599134 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Carburetor> Carburetor needles Other customers who were interested in needle set -BGM PRO- suitable for [...]

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]

The bgm PRO air filter is the perfect replacement for all Series 3 paper filters from the original air filter box. Thanks to the fine-meshed stainless steel net, the bgm filter not only offers excellent filter performance, but also a significantly improved air throughput than the standard part. The filter performance can even be increased when using filter oil. For normal road use [...]

The LEDs for the rear lights and indicators slumber peacefully under the clear glass. Once switched on, you will no longer recognize your runner. The super bright diodes make for a worryingly aggressive look. Everything else can wrap up! Thanks to the E-marking, the rear light comes with the guarantee of undisturbed fun even on public roads. bgm - Item number: BGM5015LED Availability: [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you here. In addition to quality bearings, the kit also includes high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are only supplied by Corteco. bgm - Article number: BGM1110 [...]

BGM rim for all Lambrettas of the series 1-3 (Li, LiS, TV, SX, GT, DL, GP) - painted silver. The bgm original rims offer you: High quality workmanship Very high accuracy of fit Correct rim profile Correct positioning of the valve hole Excellent concentricity for a pressed rim Excellent price / performance ratio The rim should be carefully checked each time a tire is changed. Decades-old rims [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM2105NCF Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust flange -BGM PRO Clubman V2-V3- V4- Lambretta series 1-3 - type gray cast iron are interested, also looked for: exhaust flange | Flange | Elbow | Outlet port | [...]

bgm - Item number: BGM5342 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Brakes> Brake pads Other customers who are interested in brake shoes -BGM PRO Ø = 135x16mm- Piaggio Boss, Piaggio Boxer, Piaggio Bravo, Piaggio CBA, Piaggio Ciao, Piaggio Eco, Piaggio Grillo, Piaggio Si, Piaggio Superbravo, Piaggio [...]

Conversion wiring harness for retrofitting to: Vespatronic ignition system in 50N Special with indicator (square steering head) The retrofitting to a more modern alternator / ignition type is a tried and tested means to be more durable and safe on the road. The non-contact CDI ignitions are almost indestructible and reliable, and the light output with a modern, regulator-based on-board electrical system is many times over.

The BGM stainless steel rim is manufactured in Germany with high precision by a renowned and, of course, certified company. The result is a rim that even Ferdinando Innocenti would have brought tears of happiness to his eyes. The high-strength rim is characterized by perfect concentricity, absolute freedom from rust and a reinforced rim flange. Regardless of whether stainless steel is natural or highly polished, in both [...]