Shock absorbers from the BGM PRO SC series are THE coilover kit for Vespa with TÜV! The chassis developed by BGM in Germany is available with an ABE for almost all Vespa scooters. The shock absorbers are fully adjustable and offer an incomparable driving experience that was previously unknown on a scooter. with ABE individually [...]

BGM hoses are manufactured according to our specifications especially for the needs of Vespa and Lambretta scooters. The butyl content is over 55%, which makes them extremely airtight and absolutely reliable. The high butyl content makes the hose expensive to manufacture, but in our opinion the result justifies the effort. The valves are in model-specific [...]

BGM small parts for the brake cable fastening are manufactured by a supplier for the Japanese motorcycle industry in an excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high quality of the material enables reliable fastening of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6485X Availability: in stock [...]

Conversion wiring harness for retrofitting to: Vespatronic ignition system in Rally, Sprint, VBB, Super, VNA, VNB, etc. The retrofitting to a more modern alternator / ignition type is a tried and tested means to be more permanent and safer on the road. The non-contact CDI ignitions are almost indestructible and reliable, as is the light output with a modern, regulator-supported on-board electrical system.

bgm - Item number: BGM0194R Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gearbox> Primary repair Other customers who are looking for rivet for primary repair kit -BGM ORIGINAL- Vespa Wideframe Vespa VM, VN, VL, VB, VNA, VNB, VBA, VBB, VGLA, VGLB, VNC1T (-110000) are interested, also searched [...]

SEALED connectors are sealed and thus offer a very high level of protection against water, dirt and dust (class IP67). They are perfect for use in areas where temperature, water, oil and gasoline resistance are important. Smaller than the commonly used sealed plugs, the types offered here are perfect for the on-board electronics of two-wheelers.

Screw for attaching the luggage compartment / glove compartment to the frame. Is inserted from the fender side below the cascade through the holes in the main frame and countered on the back. TIP: The PX models use a total of 4 screws. The older models such as Rally, Sprint etc. only use this type of screw for the lower fastening straps, ie here only 2 [...]

With the CDI holder from bgm it is possible to install a CDI for the electronic ignition on a Ciao of the first and second series without further modifications. The holder is simply placed under the two motor screws and attached to the motor. The following materials are required for assembly: 1. 4x washers M5x15x1,2mm 2. 2x self-locking nuts [...]

bgm - Item number: BGM8090ULGS Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,83 kg Category: Motor> Clutch> Clutch baskets Other customers who are interested in clutch basket including hub (type with cone) -BGM Pro Superstrong CNC Ultralube, type Cosa2 / FL- Vespa Wideframe GS150 (VS1-VS5), GS160 (VSB1T), SS180 (VSC1T) are interested, searched [...]

CARBURETOR TUNING SET BGM FOR DELL'ORTO PHBH28 / PHBH30 Tuning set for the classic Dell'Orto PHBH series or its replicas (YSN) SCOPE OF DELIVERY Main nozzles: 130,135 Auxiliary nozzles: 58,60 Mixing tube: AS266 Needles: X3, X7, X13 The set offers a very good one Basic set-up for almost all tuned Vespa / Lambretta engines. MAIN JET The main jet oscillates around 130-135 in most engine setups [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

High-precision reproduction of the original auxiliary shaft axis of the Vespa GS160 and SS180 models. Made of extremely resilient and tempered 42CroMo4V steel. Qualitatively not comparable with cheaper replicas. The scope of delivery also includes the corresponding red brass fitting bushing. This means that the primary drive can be repaired with 100% factory specifications. bgm - Item number: 7676645 Availability: in stock (Please check the [...]