BGM Pro shims for the clutch are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. WHY The shim is needed to distance the clutch in the engine. It is installed under the coupling pinion and is available in thicknesses of 0,8-1,6 mm (in 0,2 mm increments). [...]

bgm - Item number: BGM666PXA2 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 8,45 kg Category: Engine> Ignition> Ignitions Other customers who are interested in ignition set -BGM PRO 12V Touring - Vespa P125X / P200E (1977-1983, models with indicator, voltage regulator, without battery) - P125X (VNX1T), P150X (VLX1T), P200E (VSX1T) are interested in [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Perfect for building your own wiring harness. bgm - Item number: BGM4750 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in Bougie pipe -UNIVERSAL Ø = 8mm- 5m - black , also searched for: Bougierohr | Heat shrink tubing | Insulating tube | [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]

BGM chain sprockets are developed for the enormous powers and torques of today's engines. Made from high-alloy SCM415 / 15 CrMo 5 steel. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high standard for transmission production by Honda. Each [...]

Incredibly handy tool that removes the O rings in seconds. Working is fun! bgm - Item number: BGM8814 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,21 kg Category: Workshop requirements> Tools Other customers who are interested in O-Ring Picker -BGM ORIGINAL- were looking for also after: O [...]

RECOMMENDATION We recommend a low-alloy gear oil of classes API GL3 / GL4, even for high-performance engines, in order to prevent the clutch from slipping even under extreme loads. This also applies to our BGM Superstrong / Superstrong CR couplings. The old engine oil specification SAE30 corresponds to today's transmission oil specification SAE 85W / 90. (US) bgm - Item number: BGM8290CRKT Availability: out of stock (Please check the [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

bgm - Item number: 7675167 Availability: In stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Workshop requirements> Electrical Other customers who are interested in insulating hose for flat plug 6,3mm Ø = 0,5 , 1,0-46248mm²- DIN 10 - XNUMXpcs. interested, also searched for: insulating tube | Bougie ear | Grommet | Cable grommet | Conduit | Empty pipe [...]

bgm - Item number: BGM7890D84 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Fork> Disc brake sets Other customers who are interested in spacer sleeves for disc brakes -BGM PRO Anti -Dive (8,4mm) - Lambretta LI, LIS, SX, TV, DL, GP are interested, also looked for: