High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with HengTong type brake pump. Suitable for Vespa PX built in 2004-today. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal for braking with only two [...]

Stud set BGM Original for cylinder assembly of the Vespa 80-150ccm smallframe and largeframe engines. Made of high tensile strength steel with a rolled (rolled) thread. In contrast to a cut thread, the surface is firmer and the thread flanks are press-polished. This results in a highly resilient and permanently durable thread. Tightening torque cylinder head screws: 13-15Nm (aluminum cylinder) Tightening torque cylinder head screws: 14-18Nm (cast iron cylinder) Scope of delivery: [...]

Front brake drum 9 "+ 10" -BGM PRO cast iron- Vespa V50 R (V5A1T to No. 752188), V50 N, V50 S, V50 L, SR50, V90 brake drum "Made in Germany" by Strohspeed for BGM PRO. Suitable for all Vespa V50 models with 4-hole rims. Made of high-quality cast iron, it offers enormous advantages over conventional brake drums made of thin [...]

We carry indicator glasses from Piaggio, Siem, Triom as well as Bosatta and BGM. TRIOM / SIEM Both high-quality manufacturers who manufacture for Piaggio and therefore have an E-mark. The two manufacturers only differ slightly in terms of design and color. For perfect color consistency and fit, read off which manufacturer it is on the indicator body before buying. PIAGGIO Piaggio will [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus, for pure measurement purposes, neither the crankshaft nor new bearings are stressed. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1206TL Availability: in stock (Please check the [...]

bgm - Item number: 7676604 Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Motor> Rubber parts> Bushings Other customers who are interested in bushing silent rubber shock absorber / motor -BGM ORIGINAL (Made in Germany) Ø = 9mm x 46mm- Vespa GS160 / GS4 (VSB1T), SS180 (VSC1T) are interested, also looked for: [...]

This is the right controller to convert the vehicle electrical system completely to direct current (= DC). A corresponding ignition base plate such as the BGM8040 is also required. When converting to DC, a battery must be connected to the wiring harness. The connection of the controller is very simple: yellow from controller to yellow from the ignition base plate - 2x black ground [...]

Lambretta cylinder head gasket with 1,0 mm thickness and 71,0 mm diameter. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0244 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

The BGM PRO SC / F16 is the first sport shock absorber specially developed for the swing arm of the Vespa GS160 / GS4 / SS180 models! During development, attention was paid to the special requirements of the large models with their high possible payload and top speed, and the damper was designed accordingly. So it is not just a converted damper [...]

The BGM stainless steel rim is manufactured in Germany with high precision by a renowned and, of course, certified company. The result is a rim that even Enrico Piaggio couldn't have made better. The high-strength rim is characterized by perfect concentricity, absolute freedom from rust and a reinforced rim flange. The rim is screwed into stainless steel with the special nuts provided. Their [...]

If the mirror holes in the handlebar trim of the GTS models from 2016 are to be closed, this is difficult to implement due to the uneven trim in this area. The specially manufactured cover caps from BGM PRO are an optical and technically first-class solution. These are made of the same material as the handlebar cover and exactly follow the design.