BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Piston pin clip for piston pins with Ø = 15mm. Wire thickness 1,0mm. bgm - Item number: BGM1770C Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Cylinders> Piston clips Other customers who wanted piston clip set -BGM PRO 15mm x 1,00 , 1770mm- C-Type (BGMXNUMXN) also searched for: Piston clip | Piston lock | [...]

bgm - Item number: BGM0903EX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- stainless steel (10 pieces ) - 70mm, also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer [...]

The BGM PRO inner cable for the Lambretta rear brake (series 1-3) has a cast threaded part. ADVANTAGES The rear brake cable is now one-piece, the original compression fitting is no longer necessary. The motor can be removed from the frame much faster. The brake cable remains permanently ready for use because it is no longer squeezed. Like the original adjuster, it has an anti-twist device [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

Small antique metal rear light that cuts a fine figure on many Vespas. Very high quality reproduction with a solid metal die-cast housing. Comes complete with a black rubber seal and both 6 V and 12 V lamps. bgm - Item number: BGM5033 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: [...]

bgm - Item number: BGM7795 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,52 kg Category: Frame> Body> Steering damper Other customers who are interested in steering damper -BGM PRO SC FS / 10- 380mm- 125mm damper travel - gun metal are interested, also searched for: Steering damper | Steering damper | Shock absorber | Shattering | [...]

Perfectly coordinated carburetor kit. The scope of delivery includes the bgm PRO 17 carburetor, the bgm PRO intake manifold, sport membrane and all the small parts required for assembly. The bgm PRO carburetor is super easy to tune. The PHBN series is widespread and so all tuning parts are easily available. The open BGM PRO intake manifold fits perfectly onto the carburetor [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM ORIGINAL crankshaft sealing ring for Vespa largeframe engines made of high quality and ethanol-resistant FKM / Viton® High Quality shaft sealing ring for engine housings that require a fully rubberized shaft sealing ring. These are the motors of the Vespa Sprint150 Veloce, TS125, Rally180 / 200, PX from 1977-1984 as well as all largeframe LML motor housings. A clear identification mark is a groove in the shaft seal seat of the motor housing (motor housing with a smooth shaft seal seat requires shaft seals [...]

bgm - Item number: BGM857KTM Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Carburetor> Carburetor nozzles Other customers who are interested in mixing tube set -BGM PRO (Type: 5353) SI- (BE1-BE2-BE3-BE4-BE5-BE6), also searched for: mixing tube | Atomizer | Atomiser | Premix | Nozzle | Jet | [...]