We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

Gasket set cylinder Piaggio, Gilera 50 AC bgm - Item number: R100689040 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Seals> Gaskets Other customers who are interested in gasket set cylinder -BGM ORIGINAL 50 cc- Piaggio 50 cc AC are also interested in: Gasket set | Cylinder [...]

bgm - Item number: BGM8010GLI Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Clutch> Clutch pressure plates Other customers who are interested in disc for clutch pressure plate -BGM PRO Superstrong 10 Springs - Lambretta - Type LI are also interested in: Pressure plate | Clutch | Plate | [...]

bgm - Item number: BGM4508 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO CNC Sport, short (130mm) - Vespa LX, LXV, S, Primavera 50-150, Sprint50-150 - chrome are interested, also looked for: brake levers | Brake handle [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

bgm - Item number: BGM6477TX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Workshop supplies> Trains Other customers who are interested in end cap for outer cable -BGM ORIGINAL- Ø inside = 7mm - 10pcs. interested, also searched for: end cap | Outer cable | End cap | Pull sleeve | Pull cap | Sleeve | Grommet [...]

bgm CDI with integrated ignition coil for all electronic Vespa and Lambretta ignitions based on the so-called Ducati ignition. suitable for: Vespa PX Vespa PE Vespa T5 Vespa PK Lambretta DL / GP electronic Lambretta with conversion to electronic ignition All Vespas with conversion to electronic ignition * Stable and strong ignition spark up to well over 10.000 rpm. [...]

The BGM PRO variator dethrottles the drive and enables significantly better acceleration and a higher top speed. The roller tracks have been specifically calculated for each model. The sliding surface of the belt has been optimized for better grip. Thanks to the very good sliding properties of the rollers (including a sliding varnish-coated riser disc), this variator - completely gentle on the engine - already brings up [...]

Not suitable for Piaggio 50cm automatic (stock too wide, please use BGM0333 here (12x17x13mm) bgm - item number: BGM0334 Availability: in stock (please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Crankshaft> ball bearings Other customers who were interested in connecting rod bearings -BGM ORIGINAL (12x17x15mm) - Piaggio 70/80 cc, Vespa 50 [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

We have the BGM original turn signal switch rubber manufactured in excellent material and processing quality as a replacement for the original product no longer available from Piaggio. The rubber is mounted between the handlebar and the turn signal switch. It takes up the round shape of the handlebar and offers the switch a flat surface for mounting. To fasten the indicator switch, two screws M3x12mm [...]

This can block the piston. Is often used to adjust the ignition with the reversal measurement method. bgm - Item number: BU4931 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Motor> Tools> Tools Other customers who are interested in long piston stoppers -M14 x 1,25- (Type NGK E-candle) - [...]