Clutch linings are a very important link between the engine and the transmission. A well-functioning clutch is essential for driving fun, safety and performance. Unfortunately, many manufacturers do not make the appropriate effort with such an important component with the result that the clutches go through or do not separate properly. The covering manufacturers deliver the proper quality [...]

Anyone who does tuning at the highest level can choose the best material available on the market when choosing their crankshaft bearings. We have put together BGM PRO bearing sets for you here. In addition to quality bearings, the kit also contains high-quality shaft seals. All bearings are C4 bearings with increased internal clearance. In contrast to the original [...]

bgm - Item number: 7900055 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburetor> Carburetor components Other customers who are interested in mixture adjustment screw -BGM PRO- Mikuni TM 24, TMX 32, TMX 35, TMX 38 were also looking for: mixture adjustment screw | Adjusting screw | Carburetor screw | Propeller [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Material: The BGM crankshafts are forged like in the good old Piaggio times. During forging, the material is pressed together under high temperature and high pressure. This results in a higher density of the material. Heat is dissipated much better. The material is more resistant to distortion. This is a huge advantage compared to the crankshafts manufactured by other manufacturers whose used [...]

bgm - Item number: SC5010 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Ignition> Wiring harnesses Other customers who are interested in cable branch ignition coil / cable box -BGM ORIGINAL- Vespa V50, 50N, SR50, SS50, V90, SS90, PV125 are also interested in: Wiring harness | Harness | Cable set | Cable set [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Precisely manufactured nozzle suitable for all original and BGM PX200 cylinders. Other replica nozzles as well as partly new original Piaggio nozzles often have questionable undersize on the thread. The BGM PRO nozzle, however, fits 100%. Also ideal to replace an old worn nozzle. Is simply screwed into the cylinder (normal right-hand thread). bgm - item number: [...]

The BGM stainless steel rim is manufactured in Germany with high precision by a renowned and, of course, certified company. The result is a rim that even Enrico Piaggio couldn't have made better. The high-strength rim is characterized by perfect concentricity, absolute freedom from rust and a reinforced rim flange. The rim is screwed into stainless steel with the special nuts provided. Their [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]