The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

TIP: Please always assemble piston rings carefully. Piston rings made of cast material are only elastic to a limited extent and break relatively quickly. Some pistons have trapezoidally profiled piston rings (so-called keystone rings), these only fit in one installation position. If the ring does not move freely, please loosen it carefully and put it back in 'upside down'. Very helpful tools for work [...]

LED rear light reflector for the Lambretta. Thanks to modern LED technology, the power consumption is significantly lower than with conventional two-filament lightbulbs. This results in a better light yield for the entire system, and there is no break in the lighting effect when the brake light is activated. These are two phase LEDs. This means that each LED is used for the rear and brake lights and [...]

bgm - Item number: BGM16C10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Cylinder> Piston clips Other customers who are interested in piston clip set -BGM PRO 16mm x 1,00 , 2200mm- C-Type (BGM2225N / BGMXNUMXN) also searched for: Piston clip | Piston lock | Clip | Backup | Piston | Safety clip [...]

Latest version of the Lambretta bgm shock absorber. Compared to its predecessor, many details have been further optimized. The biggest innovation is the ability to adjust the height of the shock absorber by 10 mm. This allows additional space to be created between the frame and the suction cup. New features: bushings with silent rubbers mounted progressively wound spring rebound and compression damping with hard marking [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Cylinder head gasket -BGM PRO- 0,8mm Polini 177ccm (aluminum) bgm - Item number: WS5158 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Seals> Spacer Other customers who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 177 cc- Vespa PX125, PX150, Cosa125, Cosa150, [...]

The bgm EVOLUTION crankshafts are very cleanly processed and convince with well thought-out details: performance-optimized full-beam design well balanced (special balancing that is only available with the BGM PRO shafts) stable connecting rod available with 52mm (std.) And 55mm stroke The long stroke version with 55mm stroke has a longer connecting rod (110mm instead of the 105mm series). This ensures [...]

Cylinder base spacer for the Malossi cylinder Sport and MHR with 210ccm. This can be used to support the cylinder in order to increase the steering angle that is important for performance. The MHR cylinder in particular has turned out to be a very grateful candidate for a lift, despite its much larger flushing cross-sections than its predecessor. A prerequisite is an environment that corresponds to the cylinder, such as [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for converting from contact ignition to electronic ignition. Suitable for eg Vespa VNA, VNB, VBA, VBB, GL, Super, Sprint, GT, GTR, TS, Rally ADVANTAGES ELECTRONIC IGNITION Specially developed for converting contact-controlled motors to a maintenance-free electronic ignition. After the upgrade, the former weak [...]

SEALED connectors are sealed and thus offer a very high level of protection against water, dirt and dust (class IP67). They are perfect for use in areas where temperature, water, oil and gasoline resistance are important. Smaller than the commonly used sealed plugs, the types offered here are perfect for the on-board electronics of two-wheelers.

Front shock absorber -BGM PRO SC COMPETITION- for Vespa Largeframe Rally, Sprint, GT / GTR, TS, GL, Super, VNA, VNB, VBA, VBB Wideframe V30-33, VM, VN, VL, GS150 / GS3, VB, ACMA (1952-), Hoffmann Königin The BGM PRO SC Competition shock absorber is a further development of the successful BGM PRO F16 Sport series. The competition series differs optically through the [...]