Complete set, which unfortunately often becomes due when thieves were at work. bgm - Item number: R246050281 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,75 kg Category: Frame> Body> Locks Other customers who are interested in lock set -MBK / YAMAHA- Yamaha Aerox (YQ50 / L, 2-stroke) (2003-), MBK Nitro (YQ50 / L, [...]

bgm - Item number: 8899001 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Gearbox> U-washers Other customers who are interested in plate pressure plate set chain tensioner -BGM ORIGINAL- Lambretta Series 1-3 are also interested in: Plate | Pressure plate set | Chain tensioner | Plate | Chain tension | Preload [...]

The BGM Pro Conversion light switch is the perfect addition to: 7673183 Ignition set -BGM Pro electronic- Vespa V50 - V90, PV, ET3, PK S 9077011 Wiring harness set Conversion -BGM PRO, Vespa AC conversion to electronic ignition 7672167 Headlight -OEM QUALITY, rectangular Vespa V50 Special - Bilux It is required if the vehicle has an electronic ignition with [...]

The Fast Flow petrol taps have a high flow rate and ensure a perfect supply of fuel to the carburetor even on powerful engines. They can be exchanged 1: 1 for the original fuel tap. The fuel tap is available in these variants: TYPE WITH RESERVATION The version with reserve position corresponds to the functionality of a conventional fuel tap (open / reserve / closed). Here is [...]

High-precision reproduction of the original auxiliary shaft axis of the Vespa GS160 and SS180 models. Made of extremely resilient and tempered 42CroMo4V steel. Qualitatively not comparable with cheaper replicas. The scope of delivery also includes the corresponding red brass fitting bushing. This means that the primary drive can be repaired with 100% factory specifications. bgm - Item number: 7676645 Availability: in stock (Please check the [...]

Clutch pads BGM PRO Superstrong 'Big Ear' Racing type PK XL2 / FL2 / HP (also suitable for V50, 50N, PV, ET3, PK S, PK XL) - 4-disc CR80 pads with extra wide tab for all smallframe motors Pad type with 1x large bracket for maximum support in the clutch basket Sintered lining material such as Honda CR80 Suitable for all smallframe clutches Lining thickness (incl. carrier material): [...]

BGM adjusting screws are manufactured in an excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. As in the original, the adjusting screws have an extra high lock nut. The size M7x25mm is suitable for use as an adjusting screw for the rear brake cable on the engine.

The bgm PRO silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. The reinforced rubbers only have a slightly increased degree of hardness. Therefore, the driving comfort is maintained despite the tighter suspension. With the reinforced bgm motorsilent rubbers, the chassis gains directional stability, steering precision and rigidity. The assembly is simple and offers eg [...]

Seat cover for the standard Lambretta seat frames. The cover is covered with Alfatex on the side and top of the middle part. The bench, which was handcrafted for us in Italy, is lined with foam. This guarantees a high level of comfort even on long journeys. One of the two two-cylinder prototypes from Innocenti is equipped with a bench like this one [...]

Cylinder base gasket -BGM PRO- 1,5mm Pinasco 177ccm bgm - item number: 3820040 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Cylinder> Spacer Other customers who are Interested in spacer cylinder base -BGM ORIGINAL Pinasco 177 ccm- Vespa PX80, PX125, PX150 - 1.5mm, also looked for: [...]

bgm - Item number: BGM6475B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 2,40 kg Category: Workshop requirements> Trains Other customers who are interested in outer cover -BGM ORIGINAL, PE inner cover- Ø outside = 5mm (l = 25 meters) - interested in black, also looked for: outer shell | Train | Coat | Outer cable | [...]

bgm - Item number: 3333226 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Shock absorbers> Screws Other customers who are interested in screw rear shock absorbers -BGM ORIGINAL- M9 x 70mm extra long, AF14, galvanized- used for YSS / BGM PRO SC shock absorber / engine - Vespa V50, PV, ET3, [...]