Perfect for building your own wiring harness. bgm - Item number: BGM4750 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in Bougie pipe -UNIVERSAL Ø = 8mm- 5m - black , also searched for: Bougierohr | Heat shrink tubing | Insulating tube | [...]

BGM end sleeves are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old original from Piaggio. This guarantees a perfect fit. End sleeves have a thin shoulder at the end. They are required to fix outer cable shells in the sheet metal of the abutment (in the steering head) to prevent slipping and

bgm - Item number: BGM7984 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,80 kg Category: Frames> Wheels> Rims Other customers who are interested in rims -BGM PRO, tubeless, 2.10 -10 inch aluminum- Lambretta LI series 1-3, LI S, SX, TV series 2-3 - white are interested, also looked [...]

The BGM Superstrong for Lambretta already has a "built-in" clutch compressor system. The Superstrong coupling can be easily compressed with just two screws and long nuts. On the face of the coupling spider, two of the legs are marked with a point, at the bottom of which is the threaded hole for the screw. Here the screws are used for pre-tensioning [...]

Cable harness BGM ORIGINAL suitable for all Vespa PX models up to year of construction 1982 Italian version without battery. With this, the indicators, the horn (so-called buzzing) and all other consumers are supplied with power directly via the AC on-board network. The ignition base plate used in these vehicles is suitable for this with only 3 cables (contact ignition models) or 5 cables (vehicles).

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

bgm - Item number: BGM6487X Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,40 kg Category: Frames> Wheels> Clamp nipples and screw nipples Other customers who are interested in clamping plate set brake pedal -BGM ORIGINAL- Vespa Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), GL150 (VLA1T), Super, [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

The BGM PRO inner cable for the Lambretta rear brake (series 1-3) has a cast threaded part. ADVANTAGES The rear brake cable is now one-piece, the original compression fitting is no longer necessary. The motor can be removed from the frame much faster. The brake cable remains permanently ready for use because it is no longer squeezed. Like the original adjuster, it has an anti-twist device [...]

bgm - Item number: BGM0336 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Crankshaft> Ball bearings Other customers who are interested in connecting rod bearings -BGM ORIGINAL (16x20x20mm) - Vespa PX200, Rally180, Rally200, Cosa200, Vespa T5 125cc, Lambretta LI, LIS, SX, TV, DL, GP, Piaggio SKR, TPH125, Gilera [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Ignition coil -BGM PRO- Minarelli 50ccm (Yamaha ignition) bgm PRO Racing ignition coil with high-end secondary winding. With this coil, the secondary voltage is almost doubled. The standard ignition voltage of the original ignition coil is around 16.000V. With the race high tension coil ignition coil from BGM PRO we achieved an ignition voltage of a full 31.000V !!! The advantage lies in the better [...]