Air filter fleece BGM PRO for Vespa Smallframe V50, 50N, PV, ET3 High quality filter fleece from Marchald (Italy), manufactured for BGM PRO. Suitable for all smallframe motors with sheet metal air filter box. 1: 1 replacement for the original wire mesh. Significantly better and finer filtering. Protects the engine as no fragments of the old wire mesh can be sucked in. Also ideal for performance-enhanced engines with increased [...]

Clutch holder for all Vespas with the exception of the smallframe and Cosa clutches. We recommend BGM Pro Street gear oil (BGM2025, corresponds to specification API GL-3) as a lubricant. bgm - Item number: 1800004 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Motor> Clutch> Tools Other customers who are [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: BGM0223S10 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder base -BGM ORIGINAL- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 1.0mm are interested, also searched for: Spacer | Cylinder base | Distance seal | [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

Intake manifold Piaggio 2 stroke Can also be used very well to drive the large carburettors (from 21mm) on the Piaggio 50 cc models. bgm - Item number: A203 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Carburettor> Intake manifold Other customers who [...]

This allows the piston to be blocked. Is often used to adjust the ignition with the reversal measurement method. bgm - Item number: BU4932 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Engine> Tools> Tools Other customers who are interested in piston stoppers -M10 x 1,25- ( Type NGK C-candle), searched [...]

Exhaust BGM Pro TOURING Banana for Vespa Smallframe PV125, ET3 models. Also fits 125ccm (or larger) converted Vespa V50, 50N, 50 Special, V90, SS90, 90 Racer, V100 models. The BGM Pro Banana in the TOURING version offers discreet optics and acoustics in connection with a high-torque and broadband characteristic. It offers significantly more [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: 3330284 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gaskets> Gaskets Other customers who are looking for gasket cylinder head -POLINI 133 ccm Evolution- Vespa PV125, ET3 125, PK125 - 0,5mm are interested, also looked for: Seal | Cylinder head | Head gasket | Cylinder head gasket [...]

Please note: Piaggio 50-80ccm automatic vehicles (not PK automatic) generally use PHVA carburettors. The Hyper2 motors (from around 2001) use their own float chamber. This has a drain with hose and a drain plug. These carburettors require the float chamber with item number 1484704. NOTE: If it drips out of the hose, it is not the screw that is leaking, but the [...]

bgm - Item number: SC1808 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Other customers who are interested in Banner -BGM ORIGINAL- Banner 175x120cm also looked for: