Connection cable between tank sender and vehicle wiring harness. No longer available from Piaggio, now available as a high quality reproduction from BGM. Like the original: with cable ties around the rubber bougier tube to the frame, wiring harness-specific connector Suitable for all Vespa PX models from 1984 with plastic fuel tank sensor. Also suitable for Vespa T5 and PK XL with plastic tank sender. bgm - Article number: SC5008 Availability: on [...]

bgm - Item number: BGM6487X Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,40 kg Category: Frames> Wheels> Clamp nipples and screw nipples Other customers who are interested in clamping plate set brake pedal -BGM ORIGINAL- Vespa Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), GL150 (VLA1T), Super, [...]

Air jet set specific for the Dell'Orto carburetor SI24 / 24G (e.g. Vespa T5). The carburettors specified with the ending 'G' have a lower overall height than those with the suffix 'E' or 'D'. For this reason, shorter auxiliary and air jets are used in the 'G' carburettor types. The T5 models almost exclusively have an air jet of size 120 ex works.

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

BGM abutments are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Innocenti. This guarantees a perfect fit. The abutments are required to give the outer cable casing a stop on the frame or in the engine block. They are simply inserted into the corresponding hole. Uses [...]

Complete set to match your indicators and the taillight perfectly to the look of the scooter. With a few, easy-to-use hand movements, you get a great look! 4 indicator glasses + rear light glass in WHITE! bgm - Item number: K070193 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,43 kg Category: [...]

Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM6010S22 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 2,20mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

Lambretta bgm PRO MRB RaceTour membrane piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is the perfect choice if you have converted your RT 195 cylinder to diaphragm control and have a durable [...]

bgm - Item number: BGM666PXA2 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 8,45 kg Category: Engine> Ignition> Ignitions Other customers who are interested in ignition set -BGM PRO 12V Touring - Vespa P125X / P200E (1977-1983, models with indicator, voltage regulator, without battery) - P125X (VNX1T), P150X (VLX1T), P200E (VSX1T) are interested in [...]

bgm - Item number: BGM0336 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Crankshaft> Ball bearings Other customers who are interested in connecting rod bearings -BGM ORIGINAL (16x20x20mm) - Vespa PX200, Rally180, Rally200, Cosa200, Vespa T5 125cc, Lambretta LI, LIS, SX, TV, DL, GP, Piaggio SKR, TPH125, Gilera [...]