Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

Cover plate to close the opening for the electric starter in the air duct of the motor housing of the PX, T5 and Cosa models. Useful if the electric starter is removed or is not available. This means that no valuable cooling air is lost. bgm - item number: 7671454 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. [...]

bgm CDI with integrated ignition coil for all electronic Vespa and Lambretta ignitions based on the so-called Ducati ignition. suitable for: Vespa PX Vespa PE Vespa T5 Vespa PK Lambretta DL / GP electronic Lambretta with conversion to electronic ignition All Vespas with conversion to electronic ignition * Stable and strong ignition spark up to well over 10.000 rpm. [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: BGM1125PKSP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- 50mm - used for BGM PRO BigBpx Touring PK 50-125 exhaust, also searched for: exhaust spring | Spring | Exhaust bracket [...]

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

The bgm Pro kick starter pinions are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) and then case-hardened. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. They are manufactured exactly according to Piaggio original dimensions. Always consistently high quality. No compromise. LUBRICATION GROOVE As a special feature, the bgm Pro pinions also have a lubricating groove in the [...]

High-quality CNC sports levers from bgm PRO for vehicles with cable brakes at the front. Suitable for Vespa Largeframe models built in 1957-1998: PX, T5, Sprint, Rally, GT, GTR, TS, VNA, VNB, VBB, VBA, GS, SS180 Smallframe built in 1963-1989: V50, 50N, V90, PV125, ET3 , PK S *, PK XL1 * Milled from solid aluminum, with an elegant, resistant, hard-anodized surface. Ergonomically clear [...]