When good things get even better, the bgm PRO Lambretta waves are now the bgm PRO Competition waves. The features that have proven themselves have remained, important technical details have been further improved. Improved features are: Ground pressing surfaces for maximum stability of the joint connection and thus the highest possible security against twisting Ground and coated crankpin Forged connecting rod with CNC finishing [...]

The bgm multitool tool bgm8811 contains two tools in one: Pole wheel puller (M28x1 external thread) Clutch puller (M26x1 internal thread) The pole wheel puller (M28x1) fits all Vespa with electronic ignition (exception Vespa Rally200 Femsatronic and PK automatic), including our ignitions for retrofitting Vespa Sprint / VBB and V50 / Primavera as well as the Malossi VesPower ignitions. This puller type is also suitable [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

bgm - Item number: BGM3000EC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,02 kg Category: Oil & Chemicals> Oil Other customers who are interested in oil can (empty) -BGM PRO Oldie Edition (Vintage tin can) - 1000ml, also searched for: two-stroke oil | Two-stroke | 2 stroke | 2 | Clock | [...]

bgm - Item number: BGM1125PKSP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- 50mm - used for BGM PRO BigBpx Touring PK 50-125 exhaust, also searched for: exhaust spring | Spring | Exhaust bracket [...]

BGM flywheel nuts are made from high quality 42CrMo4. This material is extremely tensile and clearly surpasses the quality of the original nut. A tight fit of the pole wheel is ensured at all times by the high possible tightening torque. Tightening torque pole wheel nuts M10 / M11 (V50, PV, ET3, PK S, Sprint, VBB ...): 45-50 Nm M12 (PX, Rally, GS160, SS180, T5, Cosa, PK XL): 60-65 [... ]

The CLASSIC Kickstarter impresses with its timeless design. The look is kept very subtle and the CLASSIC fits every occasion. Not only does it look good, it is also superbly processed. The anodized aluminum alloy is actually far too good to trample on. The CLASSIC Kickstarter is assembled in a few simple steps and [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

bgm - Item number: BGM8015B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Clutch> Ball bearings Other customers who are interested in axial needle roller bearings -AXK 1024 / NTB 1024- (10x24x2mm) - (used for clutch pressure plate BGM8015), also looked for: needle roller bearings | Warehouse | Roller bearings | [...]

bgm - Item number: BGM7913S Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Gearbox> Screws Other customers who are interested in screw -M10 x 160mm- steel 8,8, 7913 galvanized - used for BGMXNUMX interested, also looked for:

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]