bgm - Item number: 4350011 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,14 kg Category: Frames> Cables> Cable pulls Other customers who are interested in universal pull-Ø = 1,2mm x 2500mm, nipple Ø = 5,5mm x 7mm- used as throttle cable - turned interested, also looked for: Zug | Universal | Throttle cable [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

High-quality wheel axle that is absolutely dimensionally stable * compared to many other axles offered on the market. With the axle offered here, the wheel is perfectly guided again. The bearing surfaces are hardened as in the original, thus guaranteeing a long service life. SINGLE-SIDED LOADING The one-sided suspended front wheel of the Vespa causes an asymmetrical distribution of forces on the front wheel bearings [...]

Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]

bgm - Item number: BGM4940 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Nuts Other customers who are looking for castle nut rear wheel bearing- BGM original- VESPA Øi = 40mm, Øa = 49mm, teeth = 9- Vespa Super 125 (VNC1T), Super 150 (VNB1T -153261), for front wheel bearings Vespa GS160 (VSB1T, VSB2T), SS180 [...]

We carry indicator glasses from Piaggio, Siem, Triom as well as Bosatta and BGM. TRIOM / SIEM Both high-quality manufacturers who manufacture for Piaggio and therefore have an E-mark. The two manufacturers only differ slightly in terms of design and color. For perfect color consistency and fit, read off which manufacturer it is on the indicator body before buying. PIAGGIO Piaggio will [...]

Conversion wiring harness for retrofitting to: Vespatronic ignition system in Rally, Sprint, VBB, Super, VNA, VNB, etc. The retrofitting to a more modern alternator / ignition type is a tried and tested means to be more durable and safe on the road. The non-contact CDI ignitions are almost indestructible and reliable, and the light output with a modern, regulator-supported on-board electrical system is around

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Kickstater shaft for Peugeot, Honda and Kymco In very good OEM quality bgm - Item number: 06555741 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Gearbox> Kick starter shafts Other customers who are interested in kick starter shaft -BGM ORIGINAL- Peugeot 50 cc, Honda 50 cc, Kymco 50 cc, [...]

Suitable for a load of 1,2 to max. 10 watts. Therefore ideal for LED indicators. Therefore not suitable for handlebar end indicators with festoons with more than 10 watts. Please use C7145 or 1010030 here (see 'alternatives'). bgm - item number: BGM6202 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame

BGM PRO SportTouring seat for Vespa Sprint, GT, GTR, Super, TS, GL, VNA, VBA, VNB, VBB, T4, Rally180 / 200, GS160, SS180 - the best combined to perfection The SportTouring seat is exclusively for BGM PRO by made by a traditional bench manufacturer in Italy. It combines all the positive properties of a touring-friendly bench with the look of a sports bench in the [...]