Solid BGM crankshaft for the PX80 models. The PX80 was manufactured for the German market and has a stroke of only 48mm (PX125 = 57mm). The most common damage to the PX80 engines is a defective lower connecting rod bearing, mostly caused by long idle times or worn connecting rod thrust washers. The BGM crankshaft has a solid bearing and [...]

Nice spare part that enhances every restoration. Chrome. bgm - Item number: 9010029C Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,27 kg Category: Motor> Gearbox> Kickstarter Other customers who are interested in Kickstarter -BGM ORIGINAL- Vespa V50, PV , ET3 - Chrom, also searched for: Kickstarter | Starter lever [...]

bgm - Item number: BGM2225HS12 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 1,2 - XNUMXmm are interested, also looked for: Spacer | [...]

High quality cast aluminum cylinder with a very resistant Nikasil coating. Aluminum is thermally superior to conventional gray cast iron because it emits the heat generated by the combustion process in the cylinder much better. It is not for nothing that all high-end cylinders are made of this material. A material that withstands such extreme loads as occur in the high-end sector, [...]

Lambretta cylinder head gasket with 2,0 mm thickness and 71,0 mm diameter. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0246 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head [...]

MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, which means that it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is forged and then CNC machined. STORAGE The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC racing camp and [...]

The BGM stainless steel rim is manufactured in Germany with high precision by a renowned and, of course, certified company. The result is a rim that even Enrico Piaggio couldn't have made better. The high-strength rim is characterized by perfect concentricity, absolute freedom from rust and a reinforced rim flange. The rim is screwed into stainless steel with the special nuts provided. Their [...]

The bgm PRO membrane block comes with a powerful two-flap membrane. The GRP platelets are state of the art for optimum response behavior and high performance. In addition, the GRP plates have an extremely long service life, which means that maintenance is reduced to a minimum. The light metal block is vulcanized with rubber. This means that the platelets not only seal [...]

bgm - Item number: BGM2775 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 75mm -BGM ORIGINAL- Vespa Smallframe V50, PV125, ET3, PK are also looking for: Engine housing bolts | Motor housing studs | Set | [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

bgm - Item number: BGM7913GS48 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Gearbox> Screws Other customers who are interested in grub screw with pin -DIN915- M8 x 20mm - Hexagon socket with pin 4,8mm - Interested in spare part for BGM7913, also looked for:

Shock absorbers from the BGM PRO SC series are THE coilover kit for Vespa with TÜV! The chassis developed by BGM in Germany is available with an ABE for almost all Vespa scooters. The shock absorbers are fully adjustable and offer an incomparable driving experience that was previously unknown on a scooter. with ABE individually [...]