Disc brake made in Germany with braking torque support (Antidive). This effectively prevents the annoying bottoming out when braking. This means that the large braking force of the disc brake can be used optimally. The Antidive also enables the assembly of softer fork springs, as these no longer have to absorb a bottoming out due to the high braking torque. This improves driving behavior and comfort [...]

Spare part for the BGM PRO Clubman V3.0 and V4.0 Clubman exhaust systems. The bracket attaches the exhaust body to the engine. Mounting is even easier thanks to the option of alignment in horizontal and vertical directions. bgm - Item number: BGM2105U3BR Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor [...]

BGM chain sprockets are developed for the enormous powers and torques of today's engines. Made from high-alloy SCM415 / 15 CrMo 5 steel. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high standard for transmission production by Honda. Each [...]

bgm - Item number: BGM12OR16NOS Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Engine> Gearbox> Seals Other customers who are interested in O-ring 16 × 2,7mm - BGM ORIGINAL, 1st oversize - used for kick starter shaft Vespa V50, PV125, ET3, PK, PX, T5 125ccm, Cosa, Rally, Sprint, TS, GT, GTR, [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

The BGM PRO SC shock absorber series is one of the finest chassis components that you can treat your scooter to. CNC machined, high-strength aluminum (6061) which is finally equipped with an absolutely corrosion-resistant hard anodized coating, form the basis for the high-end chassis. The very stable piston rods are machined in an extremely complex manner in order to obtain perfect surfaces with ideal sliding properties. Thereby [...]

bgm - Item number: BGM1770R635 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinders> Piston rings Other customers who are interested in piston rings -BGM PRO- Vespa PX125, PX150 , Sprint Veloce - suitable for conversion piston for Polini 177 (cast iron) and DR177 ccm cylinder - 63,5 × 1.0mm (1st oversize) [...]

These are our BGM PRO Superstrong Lambretta front brake cables. They have a strong Ø2,5mm inner cable diameter and a firmly pressed cable holder on the outer shell. Both improve the braking process considerably. Innocenti made a similar modification in May 1966 with the last models of the DL series which were equipped with a disc brake. The cable thickness has also been increased. [...]

Lambretta bgm PRO MRB RaceTour piston kit with 70 mm diameter. Complete piston kit consisting of: piston, two steel piston rings each 1mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

bgm - Item number: BGM6408FBI Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Frames> Cables> Cables Other customers who are interested in brake cable front inside -BGM ORIGINAL Superstrong Ø2,5, 1730mm (l = 2mm) - Lambretta LI, LIS, SX, TV (Series 3-XNUMX) are interested, also looked for: Brake cable | Brake cable | [...]