This practical dosing bottle fulfills two tasks: on the one hand, it serves as a storage container for quantities of up to 250 ml and at the same time, small quantities can be dosed very easily and quickly. The upper dosing chamber is filled simply by pressing the lower bottle body and has two graduation marks in 5 ml increments up to 10 ml.

BGM PRO SportTouring seat for Vespa Sprint, GT, GTR, Super, TS, GL, VNA, VBA, VNB, VBB, T4, Rally180 / 200, GS160, SS180 - the best combined to perfection The SportTouring seat is exclusively for BGM PRO by made by a traditional bench manufacturer in Italy. It combines all the positive properties of a touring-friendly bench with the look of a sports bench in the [...]

bgm - Item number: BGM4511 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO CNC Sport, long (165mm) - Vespa LX, LXV, S, Primavera 50-150, Sprint50-150 - chrome are interested, also looked for: brake levers | Brake handle [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

Clutch pads BGM PRO Superstrong 'Big Ear' Racing type PK XL2 / FL2 / HP (also suitable for V50, 50N, PV, ET3, PK S, PK XL) - 4-disc CR80 pads with extra wide tab for all smallframe motors Pad type with 1x large bracket for maximum support in the clutch basket Sintered lining material such as Honda CR80 Suitable for all smallframe clutches Lining thickness (incl. carrier material): [...]

Clutch linings are a very important link between the engine and the transmission, and a well-functioning clutch is essential for driving enjoyment, safety and performance. Unfortunately, many manufacturers do not make the appropriate effort with such an important component with the result that the clutches go through or do not separate properly. The lining manufacturers always deliver the decent quality [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

bgm - Item number: 3330284 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gaskets> Gaskets Other customers who are looking for gasket cylinder head -POLINI 133 ccm Evolution- Vespa PV125, ET3 125, PK125 - 0,5mm are interested, also looked for: Seal | Cylinder head | Head gasket | Cylinder head gasket [...]

bgm - Item number: BGM1220MAPV Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Seals> Seals Other customers who are interested in seals crankcase / fan wheel housing (5x) -BGM PRO silicone Lambretta LI. LIS, SX, TV (Series 2-3), DL / GP 125-200 are also interested in: Seal | Crankcase | [...]

bgm - Item number: BGM1125PKSP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- 50mm - used for BGM PRO BigBpx Touring PK 50-125 exhaust, also searched for: exhaust spring | Spring | Exhaust bracket [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus, for pure measurement purposes, neither the crankshaft nor new bearings are stressed. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1201TL Availability: in stock (Please check the [...]

When good things get even better, the bgm PRO Lambretta waves are now the bgm PRO Competition waves. The features that have proven themselves have remained, important technical details have been further improved. Improved features are: Ground pressing surfaces for maximum stability of the joint connection and thus the highest possible security against twisting Ground and coated crankpin Forged connecting rod with CNC finishing [...]