Special tool - Made in Germany Assembly tool for bearing types NBI253815 and B188. Suitable vehicles: Vespa PX, Cosa, T5, Sprint Veloce, PK ETS Is used to mount the needle bearing cage of the crankshaft / main shaft bearing in the small engine housing. Heat the motor housing and drive the bearing into the housing with light blows (without tilting). TIP: The ideal addition is our recoil-free [...]

BGM clamping plate sets as well as their individual parts are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high material quality enables reliable clamping of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6482B Availability: in stock [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

The fuel tap is an essential part of the fuel supply that should be in tip top condition. New spare part in OEM quality. bgm - Item number: R14402 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,08 kg Category: Frame> Tank> Fuel taps Other customers who are interested in fuel tap -BGM [...]

BGM ignition base plates and ignition kits are the solid basis for a high-quality engine. The powerful alternator guarantees perfect light output, the HQ ignition components a clean and powerful engine, the BGM pole wheel an extremely quiet engine run. Ideal for upgrading a decrepit, contact-controlled electrical system to a modern, maintenance-free high-performance ignition. ADVANTAGES: High light output thanks to maximum number of windings Proven excitation coil [...]

Set di fissaggio per il cavo contachilometri -BGM ORIGINAL- contachilometri italiani Lambretta DL, GP bgm - Item number: BGM6401SN Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Fork > Speedometer cables Other customers who are interested in fastening set for speedometer cables -BGM ORIGINAL- Italian speedometers Lambretta DL, [...]

bgm - Item number: 7675167 Availability: In stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Workshop requirements> Electrical Other customers who are interested in insulating hose for flat plug 6,3mm Ø = 0,5 , 1,0-46248mm²- DIN 10 - XNUMXpcs. interested, also searched for: insulating tube | Bougie ear | Grommet | Cable grommet | Conduit | Empty pipe [...]

For Quattrini M210 reworked manifold for the bm PRO Big Box. This means that all Big Boxes of versions 2 to 4 can be installed on the Quattrini M210. The M210 has an angled exhaust flange on the cylinder. The angle can only be found on the M210. The TS1 outlet connection must also be reworked and adapted. The distance [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Conversion wiring harness for retrofitting to: Vespatronic ignition system in 50N Special with indicator (square steering head) The retrofitting to a more modern alternator / ignition type is a tried and tested means to be more durable and safe on the road. The non-contact CDI ignitions are almost indestructible and reliable, and the light output with a modern, regulator-based on-board electrical system is many times over.