The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM4961 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,71 kg Category: Frame> Body> Main stand Other customers who are interested in main stand -BGM PRO Soft Stop System Ø = 20mm- Vespa Smallframe V50, V90, PV125, ET3 - Black are interested, also looked for: main stand | Stand | [...]

bgm - Item number: 708090 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Carburettor> Sockets Other customers who are interested in vacuum connection -BGM ORIGINAL- M6 (SW = 8, with O-ring, Ø inside = 3,5mm, Ø outside = 6,1mm, length = 30mm), also looked for: vacuum connection | [...]

bgm - Item number: BGM4590KTGT Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,24 kg Category: Frame> Brakes> Frame parts Other customers who are looking for cover brake pump set -BGM PRO, without Mirror holes- Vespa GTL125 / 200 (ZAPM311, ZAPM312), GTS125 (ZAPM313), GTS250 (ZAPM451), GTS300 (ZAPM452), GTS ie Super125 (ZAPM453), GTS ie Super300 [...]

bgm - Item number: 1079157A Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Fork> Speedometer drives Other customers who are interested in speedometer worm -BGM ORIGINAL- Vespa 9 teeth, l = 31mm, 2,7mm square, black (used in Vespa V50, 50N, 50L, 50R (V5A1T, 9 inch tires) are of interest, [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

Some Malossi V-One / VR-One motor housings have very deeply drilled receptacles for the silent rubbers in the crossbeam. To prevent the motor from moving sideways and possibly touching the chassis, we offer appropriate spacer bushes. ASSEMBLY These spacers are first inserted into the housing and thus replace the original steel disks, as they are also in the Piaggio engine housings.

bgm - Item number: BGM1770HS10 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacers Other customers who are looking for Spacer cylinder head -BGM PRO 177/187 ccm - Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 1.0mm interested, searched [...]

BGM adjusting screws are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. As in the original, the adjusting screws have an extra high lock nut. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6495S20X Availability: in stock (Please [...]

Front headlights with 2x 35 watt halogen power! Suitable for Yamaha Aerox / MBK Nitro. The headlight unit not only brings you an extremely bright and brilliant light, the optics are also much more modern and adult than the old series headlights. The lamps can be switched separately. With E-mark (can be used in traffic without registration)! bgm - Item number: BGM5091 Availability: [...]

Piaggio specific plug with enclosed contact clamps. A defective cable harness can be repaired or cable branches or entire cable harnesses can be created yourself. Simply connect the cables to the plug contact (crimp or solder with the appropriate pliers) and then push them into the plug. The contact locks in automatically and is then permanently connected to the plug. Two contacts: [...]

bgm - Item number: BGM0194R Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gearbox> Primary repair Other customers who are looking for rivet for primary repair kit -BGM ORIGINAL- Vespa Wideframe Vespa VM, VN, VL, VB, VNA, VNB, VBA, VBB, VGLA, VGLB, VNC1T (-110000) are interested, also searched [...]