bgm - Item number: 4350032 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Frames> Trains> Cable pulls Other customers who are interested in train universal -Ø = 1,2mm x 2500mm, sleeve = 2200mm, nipple Ø = 3,0mm x 3mm - used as throttle cable - braided PE - gray are of interest, also looked for: [...]

BGM original swing arm bearing set for revision of the bearing between fork and swing arm The connection between the steering tube and the front wheel swing arm is a highly stressed component on the Vespa models. Forces from all directions must be safely absorbed and transferred. The swing arm mounting is responsible for precise wheel guidance and transmits the steering impulse. Thus also a TÜV-relevant component. Camps [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

Corresponds to the original spare part, so in the very best quality. Great replacement for anyone struggling with problems caused by a defective old stator plate. bgm - Item number: SR1630851 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,61 kg Category: Engine> Ignition> Ignitions Other customers who are interested in [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus, for pure measurement purposes, neither the crankshaft nor new bearings are stressed. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1202TL Availability: in stock (Please check the [...]

BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Cylinder base gasket -BGM PRO- 1,5mm Malossi 210ccm bgm - item number: 3820027 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinder> Spacer Other customers who are Interested in spacer cylinder base -BGM ORIGINAL Malossi 210 ccm- Vespa PX200, Rally200 - 1.5mm, also looked for: Spacer [...]

bgm - Item number: BGM66060P1 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Workshop requirements> Electronics Other customers who are interested in connector set for cable harness -BGM PRO- type series 060 AM SpecialSeal, 0.85-1.25mm², waterproof - 1 plug contact are of interest, also looked for: Plug | Cable | Ignition stator | [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Our tuning fan wheel not only looks good, it also cools your engine better. This makes it ideal for tuned engines. Of course, it also looks great on standard engines. The bgm PRO Racing is also lighter than the series part. Due to the lower centrifugal mass, the engines hang more poisonously on the gas and can turn further. Technique tip: [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]