Oil can holder BGM PRO as a nice add-on for spare wheel holder in the leg shield / passage of Vespa and Lambretta The ideal place for a vintage oil can made of sheet metal (e.g. BGM3000 or BGM3000EC). The oil can holder is simply screwed onto the spare wheel holder and / or the spare wheel itself. With Vespa PX / LML it can also be used under the left side panel (if necessary, move the battery / horn rectifier). Attachment of the oil can eg [...]

Nice PX Kickstarter in high quality and clean finish. Chrome. bgm - Item number: 5050019C Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,32 kg Category: Motor> Gearbox> Kickstarter Other customers who are interested in Kickstarter-BGM ORIGINAL- Vespa PX, Cosa - Are interested in chrome, also looked for: Kickstarter | [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

BGM PRO Oldie Edition (vintage tin can) 2-stroke synthetic oil is a first-class and highly resilient two-stroke oil that meets the strict Japanese JASO FC test standard. Based on an excellent base oil, many high-quality additives ensure excellent protection for all components. The high classification as JASO FC makes it extremely low in smoke, perfectly suitable for use in engines [...]

Wiring harness in very good OEM quality, suitable for all V50 Special with handlebar end indicators from Hella. With this cable harness, not only can the ailing old cable factory be renewed, it is also ideal for converting a vehicle without indicators to such. The ideal conversion kit for this is also in our delivery program. Here we already have all the necessary parts [...]

Assembly set for reinforced chain tensioners. This set consists of a washer plate that successfully prevents the chain tensioner from bending open. In addition, M 6 studs are included in the scope of delivery, which, in contrast to the screws usually used, considerably protect the thread. The set is rounded off by locking nuts, which make the locking plate superfluous. Security fanatics who wear belts and suspenders [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]

bgm - Item number: BGM4950 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,72 kg Category: Frame> Body> Main stand Other customers who are interested in main stand -BGM PRO Soft Stop System- Vespa Largeframe Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), GT / GTR125 (VNL2T), TS125 (VNL3T), GL150 (VLA1T), VNB2T to VNB6T, [...]

Variator Set BGM PRO for Vespa Primavera 125 ie 3V (M811M), Sprint 125 ie 3V, Piaggio Liberty 125 ie 3V Complete BGM PRO variator with extended gear range, perfect torque and high rear wheel performance. After many tests, the R&D team at BGM has found the perfect symbiosis of high starting performance, linear power development and high top speed. The original [...]

IGNITION CABLE BGM PRO SILICONE 7MM The BGM Pro silicone ignition cable is a real professional product. The tinned copper wire with 1,5mm² enables a powerful spark under every condition. It is suitable for retrofitting on every motor and offers the following advantages compared to a standard PVC cable: High voltage resistant up to over 50000V (50kV) Heat resistant up to 200 ° (fire protection class FT-1 / VW-1) Copper core [...]

bgm - Item number: BGM78SEC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Workshop supplies> Screws etc.> Screws Other customers who are interested in plastic locking screws -BGM PRO M6x6mm- interested in shock absorbers of the BGM PRO Sport / Competition series also looked for: Shock absorbers | Rear | [...]