Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]

Lambretta cylinder head gasket with 1,5 mm thickness and 71,0 mm diameter. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0245 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head [...]

BGM PRO Superstrong - the original Extremely resilient coupling, very easy to use - Made in Germany The Superstrong coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and extremely high torsional rigidity. It offers a [...]

bgm 50ccm aluminum cylinder, including cylinder head. High quality cast aluminum cylinder with a very resistant Nikasil coating. Aluminum is thermally superior to conventional gray cast iron, as it emits the heat generated by the combustion process in the cylinder much better. It is not for nothing that all high-end cylinders are made of this material. A material that can withstand such extreme loads as [...]

BGM PRO CDI for IDM retrofit ignitions -original optics in connection with an optimized ignition curve for touring engines- THE PROBLEM OF ORIGINAL IDM CDI ON TOURING ENGINES All IDM-based ignitions (Vespatronic, Malossi VesPower, Polini IDM, Varitronic, Pinasco Flytech, Parmakit etc.) use the same CDI. Their ignition curve is designed for high-performance engines with late performance and high speeds. [...]

Cover plate to close the opening for the electric starter in the air duct of the motor housing of the PX, T5 and Cosa models. Useful if the electric starter is removed or is not available. This means that no valuable cooling air is lost. bgm - item number: 7671454 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. [...]

BGM end sleeves are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old original from Piaggio. This guarantees a perfect fit. End sleeves have a thin shoulder at the end. They are required to fix outer cable shells in the sheet metal of the abutment (in the steering head) to prevent slipping and

bgm - Item number: 3710019 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Crankshaft> Ball bearings Other customers who are interested in connecting rod bearings -BGM ORIGINAL (12x15x15mm) - Peugeot 50 cc (vertical cylinder), Derbi Senda, Minarelli AM6 are interested, also searched for: connecting rod bearings | Needle roller bearings | Piston pin bearings | [...]

bgm - Item number: 7676252KT Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,21 kg Category: Motor> Motor housing> Retaining plates Other customers who are interested in retaining plate set ignition coil / CDI -BGM ORIGINAL - Vespa PX 80 (V8X1T), PX 125 (VNX1T, VNX2T), PX 150 (VLX1T), PX 200 (VSX1T), Rally 200 (VSE1T [...]

bgm - Item number: BGM6710PL Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Electrics> Vehicle electrics Other customers who are looking for connector set for horn rectifier -BGM PRO- used for BGM6710 interested, also searched for: Horn rectifier | Horn regulator | Horn transformer | Rectifier | Diode | Diodes [...]

This light switch is required for classic Vespa such as the Sprint, Rally or Primavera (PV125) and V50, if a more modern motor with 12V voltage and a new wiring harness are to be installed in these. This switch has the horn contact required for this, which is designed as a "closer". The switches installed as standard have [...]

Fine-knitted glove BGM Protection A breathable back of the hand ensures extra comfort. 100% nylon fine knit for a perfect fit. The PU coating ensures optimal grip and a high sense of touch. At the same time, it protects the palms from dirt and oil. Ideal for work that requires both a high level of protection and a good sense of touch. 100% polyamide black black [...]