Rotor -BGM PRO electronic- Lambretta LI, SX, TV
Product ID: BGM210901
Lambretta DL/GP 150
Lambretta DL/GP 200
Lambretta Eibar LI 125 (Serie 2)
Lambretta Eibar LI 150 (Serie 2)
Lambretta Eibar TV 175 (Serie 2)
Lambretta GP 125 (SIL)
Lambretta GP 150 (SIL)
Lambretta GP 200 (SIL)
Lambretta LI 125 (Serie 1)
Lambretta LI 125 (Serie 2)
Lambretta LI 125 (Serie 3)
Lambretta LI 125 Special
Lambretta LI 150 (Serie 1)
Lambretta LI 150 (Serie 2)
Lambretta LI 150 (Serie 3)
Lambretta LI 150 Special
Lambretta Serveta 125 Lince
Lambretta Serveta 125 Scooterlinea
Lambretta Serveta 125 Special
Lambretta Serveta 150 Lince
Lambretta Serveta 150 Scooterlinea
Lambretta Serveta 150 Special
Lambretta Serveta 175 Scooterlinea
Lambretta Serveta 200 Jet
Lambretta Serveta 200 Lince
Lambretta Serveta 200 Scooterlinea
Lambretta TV 175 (Serie 2)
Lambretta TV 175 (Serie 3)
Lambretta TV 200
Lambretta X 150 Special
Lambretta X 200 Special
Rotor -BGM PRO Electronic- Lambretta LI, SX, TV
bgm PRO flywheel completeley developed and manufactured in Germany. This is a one piece item without any rivets or screws. It features 21th century technology with nearly original looks. It is successfully tested up to 24.000 rpm, offers the highest power when used with the V3 bgm stator plate.
The flywheel is a complete new design based on our experience with all sorts of Lambretta ignitions and the knowledge of our manufacturer. Instead of the weight we refer to the torque of inertia figure. This has an impact of the engine running, smoothness of engine as well as longevity of the crank drive.
Balancing is the next key issue. It is done to a figure that is used on race engines as well. Each flywheel is individually matched to this figure in Germany. This is the most accurate balancing on a Lambretta flywheel ever.
The flywheel is designed for ultimate reliability and power. It is a one piece casted item. Each flywheel boss is re-machined after the casting procedure to assure a 100 % fitment to the Lambretta crankshaft taper. The flywheel is successfully tested to 24.000 rpm. The bgm PRO flywheel is offered as an upgrade for all electronic ignition kits. It can be combined with all stator plates based on the 6-pole layout introduced by Ducati for the dl/GP 200 electronic (e.g. bgm, Indian, AF, AFR, Vespa conversions and so on).*
Balancing, machining and quality are second to none.
*Because of differences when combined with different ignition parts, the height of the Pickup might need to be adjusted. When a problem occurs do contact us or your bgm dealer.