High quality new edition of the cable box for the classic Vespa PX models built up to 1984 and the Sprint Veloce models, both with battery. Not available from Piaggio for a long time, we had them reproduced in a very good quality. High quality plastic, exactly 1: 1 like the original. NOTE: Also available for PX models up to 1984 without [...]
High quality new edition of the cable box for the classic Vespa PX models up to 1984. Installed under the horn cascade. Not available from Piaggio for a long time, we have had them reproduced in a very good quality. High quality plastic, exactly 1: 1 like the original. bgm - Item number: 1163603 Availability: in stock (Please check the availability here in the Scooter [...]
High quality new edition of the cable boxes for the classic Vespa PX. Here in a special version for the PX models not launched in Germany until 1984 WITHOUT a battery. The wiring harness of these vehicles already has a round connector on the ignition side, like the later PX Lusso models. Therefore this box is higher than that of the German [...]
High quality new edition of the cable box for the classic smallframe Vespa. Not available from Piaggio for a long time, we had them reproduced in a very good quality. High quality plastic, exactly 1: 1 like the original. The only deviations from the original are the Phillips screws included in the scope of delivery (instead of slotted screws). bgm - item number: 9010024N Availability: in stock (Please check [...]
Specific plugs as used by Piaggio in the Vespa PK, PX and Cosa models as well as almost all automatic vehicles. Perfect for re-wiring your own cable branches or for restoration. We also have the matching connector housings. TIP: The contacts should be processed with crimping pliers for optimal contact and tensile strength (see accessories). [...]
Specific plugs as used by Piaggio in the Vespa PK, PX and Cosa models as well as almost all automatic vehicles. Perfect for re-wiring your own cable branches or for restoration. We also have the matching connector housings. TIP: The contacts should be processed with crimping pliers for optimal contact and tensile strength (see accessories). [...]
We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]
bgm - Item number: 3332368 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in cable lug - flat receptacle 90 ° angle 6,3mm Ø = 0,75-1,5mm²- 10pcs. interested, also searched for: cable lug | Electrics | Connection | Cable | Cable connector | Flat plug | Ring eyelet | [...]
bgm - Item number: 3330401 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in cable lug ring eyelet 6,5mm Ø = 1,0 -1,5mm²- 10pcs. interested, also searched for: cable lug | Electrics | Connection | Cable | Cable connector | Flat plug | Ring eyelet | Round connector | [...]
We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]
We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]
We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]
