Carburetor components
7900069 Mixture adjustment screw -BGM PRO- Dellorto PHBH, PHBL
bgm - Item number: 7900069 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburetor> Carburetor components Other customers who are interested in mixture adjustment screw -BGM PRO- Dellorto PHBH , PHBL are also interested in: Mixture adjustment screw | Adjusting screw | Carburetor screw | Propeller | Co2 | Co | Co [...]
Carburetor components
7900056 Mixture adjustment screw -BGM PRO for PWK- (bgm, Stage 6, Keihin), PWM38
bgm - Item number: 7900056 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburettor> Carburettor components Other customers who are interested in mixture adjustment screw -BGM PRO for PWK- (bgm, Stage 6, Keihin), PWM38, also looked for: mixture adjustment screw | Adjusting screw | Carburetor screw | Propeller | Co2 [...]
Carburetor components
7900055 Mixture adjustment screw -BGM PRO- Mikuni TM 24, TMX 32, TMX 35, TMX 38
bgm - Item number: 7900055 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburetor> Carburetor components Other customers who are interested in mixture adjustment screw -BGM PRO- Mikuni TM 24, TMX 32, TMX 35, TMX 38 were also looking for: mixture adjustment screw | Adjusting screw | Carburetor screw | Propeller [...]
Carburetor components
7673423 Mixture adjustment idle screw set -DellOrto PHBL 22-24-25 / PHBH 28-30 carburettor-
bgm - Item number: 7673423 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Electrics> Carburettor components Other customers who are interested in mixture adjustment idle gas screw set -DellOrto PHBL 22-24-25 / PHBH 28-30 carburettor interested, also looked for: Mixture adjustment | Idle screws | Set | Screw | Adjusting screw | [...]
Carburetor components
7673420 Mixture adjustment- idle screw set -DellOrto PHVA carburetor- Piaggio 50 cc 2-stroke
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHVA series is mainly used on vehicles with a Piaggio engine bgm - item number: 7673420 Availability: in stock (Please check [...]
Carburetor components
7673418 Mixture adjustment, idle screw set -BGM ORIGINAL M4 for BGM KWP carburettor (24mm - 26mm)
Adjustment screw set, suitable for the derivatives of the Keihin PWK carburetors with small body (24mm - 26mm - 28mm - 30mm) from Stage6, Motoforce, Koso, OKO, etc. Contains both the air screw and the idle screw. Incl. the springs and O-rings / seals behind it. Attention: The idle screw of this set has an M4 thread, therefore not suitable for original [...]
Mixture adjustment screw BGM PRO for converting Dell'Orto SI carburettors with long hexagon mixture adjustment screw to short slotted screw The BGM PRO conversion mixture adjustment screw is used to use carburettors with long hexagon mixture adjustment screws in older engines (with studs for mounting the carburetor). It replaces the (too) long adjusting screw and enables the carburettor to be dismantled and assembled without any problems. Due to the shorter [...]
Carburetor components
7673422 Mixture adjustment- idle screw set -DellOrto PHBN carburetor- Minarelli 50 ccm electrochoke)
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHBN series is mainly used on vehicles with Minarelli engines bgm - item number: 7673422 Availability: in stock (Please check [...]
Carburetor components
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburetors with manual choke control. The PHBN series is mainly used on vehicles with a Minarelli engine bgm - item number: 7673421 Availability: in stock (Please check availability here [...]
Carburetor components
BGM8507 Mixture adjustment screw -BGM for PWK- (bgm, Stage 6, Keihin)
Mixture adjustment screw without spring for bgm PWK, Keihin PWK and Stage6 PWK carburetors bgm - item number: BGM8507 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburetor> Carburetor components Other customers who are interested in mixture adjustment screw -BGM for PWK- (bgm, Stage 6, Keihin) were also looking for [...]
