With this ball bearing and needle bearing pull-out set, the screwdriver has all the options for careful bearing dismantling! The set contains the optimally suitable extractor for most bearing inner diameters. The respective extraction expanding mandrel is inserted into the bearing to be dismantled, tightened with the supplied expansion screw and then the area around the bearing is evenly opened with an open flame or hot
Dismantling tool set for ball bearing crankshaft -BGM- Ø = 35-75mm including 2 cutting blades and extension bgm - Item number: 7671376 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Tools Other customers who are interested in dismantling tool set for crankshaft ball bearings -BGM- Ø = 35-75mm also looked for: dismantling tool | Set [...]
Good tool = good result This is what the German-made tool for dismantling / assembling the drive-side ball bearing (6305) in the Lambretta motor stands for. This means that replacement is not only done quickly but also precisely. To dismantle, heat the bearing in the motor and then simply pull it out with the tool. For mounting the ideally cold bearing in a [...]
Clever clutch tool for Vespa with double function. Designed by Wi.FSI-Parts made by BGM Pro. PULLER (Largeframe) The coupling is often stuck on the crankshaft stub. With this puller it can be removed quickly and gently. COMPRESSOR (Small + Largeframe) Ideal for compressing the clutch. This relieves the load on the circlip, and the pads can be changed quickly and safely. TECHNICAL INFO: [...]
The bgm multitool tool bgm8811 contains two tools in one: Pole wheel puller (M28x1 external thread) Clutch puller (M26x1 internal thread) The pole wheel puller (M28x1) fits all Vespa with electronic ignition (exception Vespa Rally200 Femsatronic and PK automatic), including our ignitions for retrofitting Vespa Sprint / VBB and V50 / Primavera as well as the Malossi VesPower ignitions. This puller type is also suitable [...]
The BGM multitool tool BGM8811N contains two tools in one: Pole wheel puller (M28x1 external thread) Clutch puller (M26x1 internal thread) The pole wheel puller (M28x1) fits all Vespa with electronic ignition (exception Vespa Rally200 Femsatronic and PK automatic), including our ignitions for converting the Vespa Sprint / VBB and V50 / Primavera as well as the Malossi VesPower ignitions. This puller type is also suitable [...]
